View Full Version : Air and Fuel Delivery
- TB Polishing
- intakes
- fuel pump
- gas gauge going crazy.
- Diffuser removal
- throttle plate
- Throttle body Spacers?
- Fuel filter location
- Vararam Results
- gas milage
- Manifold Spacer!?!?
- Fuel pressure regulator??
- TB Spacer question
- No fuel to injectors. Pump or filter?
- what do i need for carburation
- Air Injection, what is it?
- Port & Polish
- tips to pass emission tests
- cpi intakes/superchargers
- TBI parts
- Air filter
- CFM Tech working on new Intake manifold
- CFM-Tech Throttle Body
- ?s about AIR injection
- Manifold Spacer?
- Engine "dieseling"
- Gas mileage drain?
- New Spider Injection Helpp!!!this Is Confusing
- Holley 670 cfm problem
- I hate CPInjection
- CPI conversion
- Butterfly plate mod?
- air box hack
- TBI air filter
- sudden drop off in fuel economy
- CPI observations
- newer Vortec heads/older intake manifold
- Intake
- VMax Manifold Spacer? Any thoughts?
- Holley 4.3l MPFI
- vortec intake??
- Throttle body mod
- Corvette TB on 4.3L
- hmm, might have found a solution to our intake flow problems
- Diffuser Removal (throttle blade butterfly
- Multi-tech Inj. flow rates and possible Mods
- CFM Tech Bored TB
- IAT Relocater Mod
- Vacuum hoses??
- Fuel Pressure Reg. on 99 4.3
- MAF sensor
- Bored throttle body...
- rerouted fuel lines
- Throttle Body Spacer
- K&N or Brutte
- The EGR Limiter
- Throttle body problems
- Gas Gauge trouble & Recent CEL
- Gas mileage issues
- The TPS mod....
- Tbi
- Intake Manifold Question
- I need a fuel pump!
- tbi spacer
- EGR plates
- CPI '92-'95: Why it leaks and How to fix
- TB Spacer anyone?
- Throttle blade/EGR mod
- HELP: Installing the Nut Kit / 4.3 Vortec
- Fuel Pump Question...
- edelbrock intakes
- fuel pressure regulator
- adjustable fuel pressure
- VMax Manifold Spacer...12hp for $269
- ....HELP--Cylinders & Oil pan full of GAS
- TPS Mod / EGR Mod???
- Holley 9901-301
- cpi question
- throttlebody spacer
- maf or hypertech programer
- The knocking and pinging is back
- Racing Fuel hurting me or no?
- 96+ 20's and K&N intake for sale
- need top of intake
- Edelbrock 3713
- cpi cold air intake.
- Problem with Fuel!!!
- What is better a carb or TBI
- Fuel Pump
- airaid quick-fit system ????'s
- egr help 4.3
- Replaced my MAF for a 2nd time
- Intake gaskets?
- Intake Swap?
- sputter at steady rpm and at take off
- Intake backfire
- TBI to CARB questions??
- MAYDAY! Fuel pump died HELP
- spacer
- Intake Spacer???
- on throttle / bogging down
- Would this fuel pump work on my truck?
- Gas Mileage Problem. Help?
- Best Air Intake System???
- K&N intake
- MAF Sensor mod
- Chng pressure regulator or CPI - what's best?
- Added Air Flow = Hotter Operating Temps???
- ***m fuel Pump!
- Fuel Injection question
- throttle body spacer
- TPS modification
- cpi issues?
- ? on de-screening MAF
- EGR valve or Control Solenoid Problem
- 4.3L Vortec intakes
- Need help with a rough idle problem
- Cold Start High Idle
- Fuel Line Repair
- carb vs tbi
- Nylon Fuel Line
- fuel gauge problem
- 89 4.3 oil keeps filling with gas?
- Holley intake manifold #300-79
- CFM Tech Throttle Body
- no spark or fuel
- High idle problems
- EGR limiter for my design?
- TB Diffuser MOD
- new gas tank/pump now cuts out when under 1/2 tank of gas
- Some CPI questions
- 4.3 bogging out
- Diffuser Removal?
- Gas guage going south
- fuel injector change
- Q: relocate air temp sensor?
- Cold Air Intake On v6 4.3L???
- No Power And Bad Gas Mileage
- Installing a throttle body spacer...I need some help!
- TBI won't idle; has no power either
- fuel pump questions
- Custom Fuel rails
- FPR on CSEFI
- carb cleaning
- K&N filter, worth the money??
- leaky fuel line
- Fires but no fuel.
- 2114 Conversion?
- tbi spacer-good or bad?
- 2002 Intake
- Aftermarket Air intake
- what is the best throttle body space?
- My ram air, cold air fabrication.
- k&n intake
- edelbrock 2114
- cold air intake problem
- port and polish intake?
- fuel gage troubles
- fuel pump?
- Fuel Line Recommendations
- bad intake rtv/gasket?
- idle problems please help soon!!!!
- egr location???
- fuel injector question
- fuel regulator
- Throttle Response Enhancers?!
- Help w/ 2114 conversion
- hard starting / spider??
- vacuum lines
- Vaccuum ON / OFF switch by PCV valve
- 1992 CPI
- Intake Manifold
- new regulator,nut kit,and o2 won't start now ?
- Weird Fuel Pump Problem
- vacuum line sizes....
- cpi problem
- Windage Tray for 4.3L cpi buildup
- how do i change my fuel filter
- which cold air intake?
- 2114 carb swap
- Evap Canister
- Code for runnin too low on gas?
- Edelbrock intake manifold install details
- custom CAI question
- homemade intake
- what filter is this?
- need new maf
- TBI idle problems
- Crazy Idle
- Gas Tank Upgrade
- heck yea!!!
- Throttle Body Mod. Opinions?????
- wanting to switch from CSFI to carb...
- Fuel Injection Upgrade Kit
- "nut kit" ???
- fuel pressure question
- tps mod
- Need vaccum diagram plz!
- Aftermarket fuel injection for 4.3
- 4.3 sluggish at mid throttle... no codes...
- Intake for GMC SONOMA 4.3
- How to check a fuel pump
- 89 TBI failed emissions ... again
- Seafoam through the PCV valve?
- CAI (Cold Air Intake) from Ebay
- lookin for a tbs
- TBI Problems!
- I rebuilt the TBI but now it runs like garbage.
- bigger throttle bodies
- What size carb?
- test new intake manifold gasket
- 2002 V6 GMC Sonoma Intake
- EVAP Location
- evap canister
- CFM -Tech TB blade
- Bigger injectors??
- tube under throttlebody?
- Install a CFM-tech bored throttlebody
- K&N cold air intake
- Cold Air intake heat shield
- help Blazer 4.3 cpi
- Throttle sticks when runing?
- Intake manifold, or heater core?
- Help!!!! CPI troubles......
- Installing a Ram Air Intake
- Cold Air Intake Heat Shield
- 94 4.3 CPI poor performance
- fuel for compression?
- 94 4.3 TBI clicking is too loud
- cpi issues
- Diffuser removal?
- Unpluged MAF....now check engine light
- Fuel pump relay location
- 1994 P/U extra Cab Fuel Pump Relay???? 4.3 CPI
- VMAX Manifold Spacer
- tb spacer
- Confused , Injectors dumping fuel
- Testing fuel Pressure?
- Throttle Position Sensor, Again??!
- TBI Questions
- TB port and polish?
- Engine dies when it warms up
- Economy Mods?
- EFI Live
- HI GUYS, NEED HELP IN A HURRY
- CPI Tuning
- Throttle body sticks
- fuel injection
- Which Brand Fuel Pump?
- How To: Install adjustable FPR and injector spacer
- Newbie CPI issues
- throttle linkage for new 500 edelbrock carb
- How much will it cost to change out Intake MAnifold Gaskets?
- You know me and weird intakes/scoops/incustion...etc
- IAT (intake air temp) Sensor Module
- Intake Manifold
- Carb conversion questions??
- 4.3 TBI Issues
- no DTC's but....
- tbi -> cpi
- Improving the Cold Air Intake (CAI)
- AIT placement?
- tbi throttle shaft
- Intank fuel pump... can you?
- How do I depressurize fuel system ?
- strange noise.
- De-coring the schrader valve on the fuel rail...
- Starting fluid gets it to start, no power, dies into gear
- fuel in oil (alot)
- real mpfi
- Gas Mileage???
- Gas Savings Poll
- Inbound Fuel Line
- Changing intake manifold gasket and messed up fuel line threads.
- gasket advice
- will the vararam insert fit with a K&N intake?
- think i will notice a difference?
- Fuel system questions
- TB Spacer : Sums it up
- Has any one done the GM upgrade injectors?
- 1999 L35 block
- SCPI injection o-ring gasket question-HELP!
- Good average MPG for a 4.3L
- late 90s 4.3L with carb won't stay at idle
- What does it take to....
- Edelbrock 3713 & egr
- cfm tech ported tb; worth it???
- intake man spacer???
- Our fueling problems may be over soon.
- Gas Gauge Stops Reading When Lower Than Half
- Air box mod
- Nut Kit
- GM Intake Elbows
- 4.3l Propane Injection Installation.
- CFM Tech
- Removed Air Box
- Nut Kit
- help!!
- fuel tank vent valve
- I don't think the Vortec likes me very much.
- throttle body butterfly help
- fuel gage ???
- HELP...trouble after TB spacer attempt
- Stalled W/ no re-start
- Aftermarket Airbox
- Problem!
- blazer wont start
- 98 loss of power
- CPI 92-94 Cold Air intake
- fuel pressure?
- 97 Chevy asrto
- Fuel Filter
- IAC/TPS location
- Granatelli MAF Updated
- ETHANOL IN GAS???
- top end bog
- Diffuser plate mod help
- I'm gonna cut it
- TBI Cold Air Intake
- 96 Bravada Starting Issue
- Marine intake
- crappy vacuum gauge or what?
- fuel pump or tps?
- Fuel Pressure test?!?!
- INJECTOR CLEANING
- Fuel filter
- Average life span of fuel injectors (spider set-up)
- CPI manifold "questions"
- Fuel pump problems??
- Need alot of help and suggestions.
- 4.3L Full MPI setup
- dual intake pics?
- where to purchase new CPI lines?
- Rebuilt Spider or DIY?
- Flexible fuel line/fittings question
- TB Blade Mod help
- Is the CPI manifold supposed to look like this?
- 2001 Blazer 4.3 2dr fuel pump
- fuel pump issues
- Fuel Pump continuiosly running after ignition shut off
- quick 2114 question
- i smell gas.
- CPI pump for MPFI?
- safari cpi question
- Cold Start Valve
- Fuel tank vent
- Marine intake not going to happen
- 96 Blazer vacuum issues.
- injection cleaner
- Evap solenoid PN
- Extra injector controller
- anybody ever hear of this intake?
- Fuel Line Help!!! Please!!
- shorting route for cold air?
- Starting problems?????
- Marine Intake Manifolds
- Blazelanche quit.
- where did i see?
- Heat Reflective materail search
- Ever hear of this?
- I am looking for a used Edelbrock intake manifold #2114 96-04
- 2000 Fuel Line connections?
- CPI loyalists
- OOO Sexy (ive never seen one of these)
- starting issue
- Gettin a fuel Pressure gauge inside my ride.
- Stumped! 92 4.3 tbi problems
- Got a problem with my '00
- DTC P0140
- fuel pump from 95 same as 96-97 ?
- ebay intake
- true ram air
- Disconnected Hose
- Cowl induction for CPI
- 4.3 marine intake question
- Rebuilding a TBI Throttle Body
- 93 cpi bogs out
- Science talks BS walks
- '00 Blazer running rich, hard starting.
- advice on sea foam please!
- marine intake ?s
- 2114 intake
- No power to the fuel pump
- What would cause rough idling upon start up?
- help on pcv breather
- need help
- MAF problem?
- Where to get a replacement IAC wiring harness?
- High Pitched Whistling
- fuel problem
- Fuel in Crankcase
- MY TRUCK NO LIKE START!!
- Hot start?
- My truck is junk: Fuel pump died
- 4.3 turbo kit
- 91 Running Crazy Rich after rocker swap!!
- Problem with starting
- Fuel lines
- 1992 s-10 blazer has real poor acceleration lurching on pedal input?
- throttle blade removal
- Uh oh... What Now?
- really?
- Check Engine Problem something about fuel sensor
- Holley Carburetor
- 2005 want start
- Fuel pressure ?s
- supercharger
- Fuel Regulator, Nut Kit, Both or Neither?
- Modded Injector Spider for 96+ 4.3L Info Thread
- Replacing the guts of our "expensive" fuel pump....
- Hesitation when accelerating
- Spectre air filter.
- Buying a Cold Air Intake...
- Cyl NR2 Misfire
- 4.3 SLP intake
- I have the infamous injector spider leak.
- 95 jimmy drives but bogs down after mile
- Fitch Fuel Catalyst
- Missing something.. Wont start
- Won't start - think it's a fuel system issue
- Vacuum Hose,
- COOL INTAKES
- CPI tuning valve
- Idle speed
- intake 4.3
- I don't know?
- Where can I get new petroleum/gas hoses?
- fuel cell
- fuel pressure requirements?
- gas leak
- CPI veteranarian "fixing a leaky cpi spider"
- Help mt csefi won't start
- aftermarket intake mainfold
- vararam worth it guys?
- money to spend and dont know what to buy
- how to increase fuel delivery???
- FPR issues again, I think ??
- Lean Vortec - Not so mean :(
- vararam velocity stack
- what does this do?
- Vacuum hose / Emission hose diagram?
- throttle body air cleaner
- Air filter recommendations...
- Air intake with TB spacer?
- Truck not starting.......
- Can anyone tell me what the fuel pressure should be...
- Filter on TB??
- Just converted from CSFI to MFI, now I have problems.
- Look at what I get to do
- how long will stk fuel pump last w regulator
- shifting problems
- fuel tanks building pressure ...alot
- Bouncing Fuel Pressure Gauge Needle
- pics under plenum greatly appreciated
- Replacement Injectors
- 99 4.3 Intake????
- CPI to TBI
- bogging while hitting the gas..
- OK So What Do I Do?
- which O2 sensor gives up first?
- fuel pump ground
- 90 S10 4.3
- This needs translation.....
- 4.3L Marine Intake Install Info and Questions (answers? :P) Thread
- 98-up Intake Manifold Gasket
- Doesn't start on the first crank
- VMax & K&N kit
- 4.3 Poppets Stuck Open???
- Best place for CPI parts?
- boshe (Bosch) fuel pump
- walbro pump install how to
- Hydrogen Generator
- 4.3 intake options?
- 94 S-10 blazer Cpi fuel problem HELP!!!
- Fuel pressure regulator??
- 350 tb on 4.3?
- bogging when accelerate
- changed fpr and nut kit
- Fuel Pump or... something else?
- 4.3 rough idle at start up
- 4.3 Quick Bolt On Ponnies
- 00 jimmy no fuel pump power
- vac lines, firing order and distributor
- Fuel level sending unit mod
- Fuel filter
- fuel del.
- E85 question
- Rough starts, idle, and hesitation
- IAC Question
- performance fuel pump
- Same fuel problem ....Different engine .....4.3 V6
- do they make a snorkel?
- 4.3 runs rich
- Marine Intake or Walbro swap=Hard Cold Starts???
- DIY water meth?
- what injector to what cylinder
- 94 blazer, fuel prob...
- Another one with starting problems
- FPR
- Possible cause of hard starts.
- Need a 4.3 expert in Atlanta
- Need some help with my sending unit/pump
- a/f gauge??
- Looking to get more power out of a CPI...
- Exhaust
- trouble idleing need help bad
- Aeromotive HP 340 in-tank fuel pumps.
- bad gas mileage
- Fuel Cell Pump
- Truck bucks and surges at part throttle, but not in full throttle
- 4.3 runs great but gets crap MPG
- Fuel Pressure Inquiry
- FUEL Guage Not working right
- Fuel Pump problem again, done some testing need some directions
- Cold air intake!
- bogging
- Spider injectors
- replacement
- Picked up a new pump, but stuck wiring. please help me asap
- gas tank help
- interesting approach to cold air intake - thoughts?
- Throttle Blade mod
- CPI injection trouble shooting - power + gass = no spray
- Not s10 related But help?
- backfiring through the TB
- direct injection
- 4.3 stalls
- performance throttle body
- power
- Picture of TB Required..
- Vacuum schematic for 96 s10 4.3 X VIN?
- In-Tank Aeromotive 340 Fuel Pump install (How I'm doing it)
- Strange fuel gauge fluctuation
- Temp sending units.
- marine intake throttle body question
- Fuel pump test lead
- fuel tank pressure
- Xtreme80 throttle body
- Air vacuum leak noise behind intake?
- Starting problem! please help!!!
- Bad Fuel Pump?
- SCPI to TBI swap.
- fuel emission box delete?
- Reminder of how important a tune up is!!!!
- Vortec CPI info?
- Cold air intake questions
- Boost A Pump
- horrible throttle response.
- New TBI Units?
- best way to clean plenum
- Fuel tank vent to canister
- EFILIFE PROGRAMER
- 94 4.3L blazer lt tahoe
- Throttle body bolts
- fmu install trouble
- Has anyone ever thought about what style the stock manifold is?
- WTF is this ???
- 2000 zr2 Fueling issues
- Got to hold gas pedal to floor to get to start?
- HELP!! Broke Fuel Pump Housing
- MAF
- Engine cranks over and over but will not fire.
- help quick please
- fuel pressure wont hold over night
- Choose fuel pump
- Fuel tank and mischievious 3 yr old need help Please
- CPI regulator done..need vacuum line help
- Fuel pump Removal
- Aftermarket MAF sensor
Powered by vBulletin® Version 4.1.7 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.