here is my firewall

[tensecond_s10]

i got an email that asked me to sign in cause i havent been on in a while, so here is what i have been working on. hope you like

http://img.photobucket.com/albums/v602/tensecond_s10/Firewallwithengine004.jpg
http://img.photobucket.com/albums/v602/tensecond_s10/Firewallwithengine001.jpg
http://img.photobucket.com/albums/v602/tensecond_s10/Firewallwithengine002.jpg

[lucy_blue_93]

damn...is it finished yet? looks good man.

[tensecond_s10]

thats as far as i am. its cold and i just got a playstation 3 so i havent touched it lately

[bespurcell]

i got an email that asked me to sign in cause i havent been on in a while, so here is what i have been working on. hope you like

http://img.photobucket.com/albums/v602/tensecond_s10/Firewallwithengine004.jpg
http://img.photobucket.com/albums/v602/tensecond_s10/Firewallwithengine001.jpg
http://img.photobucket.com/albums/v602/tensecond_s10/Firewallwithengine002.jpg
That email explains why there has been alot of people posting tonight that normally don't. I'm glad though. Your truck looks like it's going to be fast. Any specs on that engine?

[Hammer Head]

Looks great.. I see you have angled plug heads. What kind of headers are you going w/? The hedman hustlers or are you fabin your own to fit, since not a lot of companies make headers that fit angled plug heads?

[tensecond_s10]

i have a set of 1 7/8 hedman fenderwell headers. the engine is a 383 12:1 brodix track 1 heads cam motion solid roller brodix intake 1050 dominator. it has gone 10.97 @ 125 with the old intake and carb. wont know till spring what it will run with the dominator. besides the carb and intake, i fixed the pinion angle, c-notched the frame for suspension movement, and got a little narrower tire that wont rub anymore. i dont know how much it was slowing me down, but both tires rubbing inside and out fenderwells wasnt helping any. im also installing an NOS big shot. 200 additional hp should help me into the 9's

[lucy_blue_93]

umm...dont be surprised if in the near future you get a pm from me on tips for a big block;)

[87wildside]

umm...dont be surprised if in the near future you get a pm from me on tips for a big block;)But thats a small block...haha.

So did you do the bead rolling on it? I gotta get a bead roller so bad.:)

[jamesB]

looks clean

[Blazer69]

wow looks so clean...nice work

[tensecond_s10]

i did do the bead rolling but its a buddy of mine's. i was just about to go buy one when i found out he had one. i want to get a 2wd 2dr blazer and do a similar firewall. ill go buy my own beadroller when i start that project. probably wont set the engine as far back in that truck but after doing this firewall, i wont be able to do another s10 swap and leave it stock. there is however, much more fabricating than just the f/w. pedals, fuse block, m/c mount, steering column mount, cowl panel and fender mounts, and that doesnt include any type of heater or wiper mods if you keep those. i did away with both.

oh, and thanks for the compliments

[dt4ts3]

WOW. Big blocks rock. That looks nice and clean.

[383blaze]

Looks great.. I see you have angled plug heads. What kind of headers are you going w/? The hedman hustlers or are you fabin your own to fit, since not a lot of companies make headers that fit angled plug heads?
with the firewall like that,,i bet he could use semi headers,,lol