Even out my drop.

[Y NI Rider]

I just put on 3" belltech front coils on my xtreme and planning on putting 2" spindles later. What would leavel it out now and when I put the spindles later. And is the 3" coils a bad ideah?
I was thinking 2" blocks for now but dont want to change the leafs when I put on the spindles. What the best set up.

[LowSDime97]

heres my setup, 2" drop spindles, cut one coil off the front springs, and 3" blocks in the rear...plus lower pro tires due to clearance cuz the stock tires i had were a 215/75/15 and now i have 215/65/15 and they r perfect...heres some pics of my truck and as u can see some of the pics are older by the dates but the drop is still the same

[Mikz86TA]

LowSDime.....are your springs std or ZQ8? He has a Xtreme and probably the stock ZQ8s. So your setup would have a different outcome by cutting the coil off than his. Just thought Id point that out =)

[Y NI Rider]

Damn LowS10 nice ride dude. I think the ZQ8 has 1.5 in lower than stock. I just put on the coils and the drop diffrence is almost an inch from stock. But I had the 2.2 ZQ8 coils and the wheight from the 4.3 lowered it a bit. I'm going to guess that 2" blocks might work alright. I'l measer them laterz. Darn spindles didnt want to come off so I droped the lower arm haha.

[Y NI Rider]

Ok I got a question for you guys. After taking off my coils I noticed after the fact that my 2.2 ZQ8 coils are the same size of the 4.3 ZQ6 coils that I was told was not the same drop. Darn now I'm goin to take the 3" belltechs off and throw on the ZQ6 coils and probly put spindles on later.

[LowSDime97]

LowSDime.....are your springs std or ZQ8? He has a Xtreme and probably the stock ZQ8s. So your setup would have a different outcome by cutting the coil off than his. Just thought Id point that out =)
ya mine are just STD stock, all my suspension components are stock BTW, and thanks Rider for the comments