I would like to know a few things......

[importmaster1300]

First will front and rear ZQ-8 Sway bars, bolt right up to my 98 2.2?
Second......I cant remember if it is LilyellowZQ-8 or Supercharged but, I talked to one of you a while ago about a grille. My cousin wants to sway a older grille w/ a newer one. My last question can be found here beacuse I dont wanna type it again. Thanks http://www.s10forum.com/forum/showthread.php?t=152951

[bvr775]

as long as you drop the truck 2" front and rear I don't see why you would have any problems bolting on z-q8 sways.

I don't know why you want to bolt up a used clutch to u'r truck, but you should check around you localy and find a clutch rebulder shop.

as far the grill. there is a tread here where somebody explains all the parts needed to upgrade the grill.

[DROPPEDGMC]

if the swaybar is a different thickness, you'll need to put the correct bushing around it

[bvr775]

ok the zq8 sways or allright, but you have to remeber even though it's performance it still factory performance and designed to make a large group happy. I thinck the rear zq8 sway are a bit soft personaly and it causes the trucks to understeer exspesialy with a lite engine like a 4 cyl. if your really looking for a buget bolt-up you can a set of g-max sways for around 200-300 bux and they come with all the mounting hardware and come in 1/2" all the up to 1 3/8" dia bars. the bigger the sway the harder and less supension aticulation you get.

[T Man]

A used clutch? There is a reason it is out of a truck if you get it. People dont take out good clutches, especially expensive ones for no reason. Spend the money, get a new one and you will have what ever warranty comes with it as well

[importmaster1300]

With the centerforce 2 can you use the stock PP and the CF disk?
If so does anyone know where to get one for under $80 because that is how much I found them for new.