New interior pics...

[s10cyncrvr]

Finished up my interior this week. A list of what was done:
- New seats
- Replaced vinyl floor with carpet
- Made a new center console
- Smoothed and painted various items
- Camaro guage needles
- 5 point harnesses with mounting bar.

Here is a before pic...
http://img.photobucket.com/albums/v607/s10cyncrvr/finishedinterior08.jpg

Here are the afters... the shifter boot is temporay until I get the new one finished.
http://img.photobucket.com/albums/v607/s10cyncrvr/finishedinterior06.jpg
http://img.photobucket.com/albums/v607/s10cyncrvr/finishedinterior07.jpg
http://img.photobucket.com/albums/v607/s10cyncrvr/finishedinterior09.jpg
http://img.photobucket.com/albums/v607/s10cyncrvr/finishedinterior05.jpg
http://img.photobucket.com/albums/v607/s10cyncrvr/finishedinterior04.jpg
http://img.photobucket.com/albums/v607/s10cyncrvr/finishedinterior03.jpg
http://img.photobucket.com/albums/v607/s10cyncrvr/finishedinterior02.jpg
http://img.photobucket.com/albums/v607/s10cyncrvr/finishedinterior01.jpg

[s10cyncrvr]

Here's a few under construction pics...
http://img.photobucket.com/albums/v607/s10cyncrvr/harnessbar01.jpg
http://img.photobucket.com/albums/v607/s10cyncrvr/harnessbar05.jpg
http://www.imagestation.com/picture/sraid148/p349a4bde4829af16dd589a7ec0ae3a73/f61ca3a3.jpg
http://www.imagestation.com/picture/sraid148/pb9b8d1562bcb8ac05454bcd0cff6f95f/f61190be.jpg
http://www.imagestation.com/picture/sraid148/p0f547ecd36a4210114feb6099cdebc72/f61190bc.jpg
http://img.photobucket.com/albums/v607/s10cyncrvr/console05.jpg
http://img.photobucket.com/albums/v607/s10cyncrvr/nointerior01.jpg
http://img.photobucket.com/albums/v607/s10cyncrvr/console11.jpg
http://img.photobucket.com/albums/v607/s10cyncrvr/console10.jpg

[T Man]

Looks really good. I like the console a lot

[joker2040]

That's nice!! I wish my interior was pimped out...

[importmaster1300]

OK I have a few questions! lol
How much was the guage setup?
How much were those seats and what did they come out of?
Where did you get everything and how much did it cost?!

[s10cyncrvr]

OK I have a few questions! lol
How much was the guage setup?
How much were those seats and what did they come out of?
Where did you get everything and how much did it cost?!

The guages are from Nu Image. I bought them a few years back. I think they were about $80?? They were the standard silver sheet style, which I didn't like so I cut them and my stock guages so that only the guages are silver and all the warning light/etc. were the stock black. It's pretty easy just make sure that your cut is perfect because the seam has to hide behind the thin plastic overlay. The needles were form a late 90's F-body in the junkyard.

The seats I picked up at a swapmeet for $20. They are Recaros and came in mid-80's Mustangs. SVO's had them and they were an option on the GT's for a few years. Tore them apart and sandblasted everything cause they were a big ball of rust. Then repainted and had them recovered. Got the sliders out of a blazer with buckets and cut them down so that they would sit lower in the truck. Using the blazer sliders worked out well since I could reuse all the stock trim pieces to hide the brackets. The seats just barely fit, width wise, with the console in there.

As far as everything else...
The harness bar I made -- about $30 for steel and fasteners
Blazer console was from the junkyard -- $25
Harnesses were from Jegs -- $120 a piece
Carpet i got from a friend -- $20
Clock I got off the internet -- about $70

[DROPPEDGMC]

that looks pretty darn good:cool:

[Maximus]

What in the world made the clock cost 70 bucks??Oh and the whole interior looks bad azz.Real nice job.

[ZR1-S10]

I love the seats and the dark look of the intrior. The harness and bar also looks great, wish I could do that but my truck's extended cab and it would be alot harder to do without geting in the way of the jump seats.

[Supercharged-ZQ8]

Looks slick as hell. Nice work, very nice work!

[s10cyncrvr]

What in the world made the clock cost 70 bucks??Oh and the whole interior looks bad azz.Real nice job.

The clock doesn't have a knob going through the glass to adjust the time. It uses a momentary switch thats hidden for a cleaner look. Plus its from a small company so they probably charge a little higher too.

Thank you everyone for the compliments.

[firehawkclone]

thats bad a$$ dude,very nice work!

[LEADFOOT]

Sweet. Very nice. I bet your proud of your work. Looks really good.

[LEADFOOT]

MAXIMUS............Where did you get that kick *** avatar? I like it!

[Maximus]

Which one ive changed it several times tonight.If your talking about the 3 and 8 morphing one I found it on a sight awhile back.Can't remember the name.I have a few others if you wanna use one of them.

[blazen]

hey interrior looks sweet. I need to get some nice seats in my truck the only prob is I need 4 and I just dont have the money for new ones right now. guess I need to go to some swap meets.

[CountryMud]

How about a link to the seller on ebay for that clock? :cool:
Edit- What brand, type, and color is that paint actually?

[s10cyncrvr]

Here's the site I bought the clock from. They carry guages from many different companies.
http://www.egauges.com/vdo_main.asp?Cart=

The paint I got at a local paint shop. I just gave them the paint code and they mixed it up. I believe GM called the paint on my truck Dark Pewter Metalic. I forget what suppliers they have but I know for sure they don't sell Dupont. It is a basecoat/clearcoat type of paint.

[LoRyder]

Wow man! That's awesome, good work!

[Mike 92S10]

Very, very nice.