manual brakes?

[biglouie_underpressure]

i would like to save some power and room by removing the booster is there a kit to swap over to manual brakes?

[Hammer Head]

Do you have a 1st gen or 2nd gen? All you need for 1st gens is find the block-off plate & get the manual master. 2nd gens aren't going to be as easy.

[87wildside]

The first gens also have a different part number for the rear wheel cylinders but that's it.

[BigTruckDrivah]

Why would you want to do that with all the idiots on the road today?

[BigTruckDrivah]

Maybe its different in Fl, I'm in Tx., lol, that makes a difference.

[biglouie_underpressure]

2nd gen

[biglouie_underpressure]

Why would you want to do that with all the idiots on the road today?

room and power

[jshiv]

room and power

i think that would be the last place i would look for it

[biglouie_underpressure]

i think that would be the last place i would look for it

try pulling heads off with arp head studs

[blue388]

X2 on the head removal with studs. Check out a wilwoods dual master cylinder pedal. #340-1287 and master cylinder #260-6766 you'll need two of these. This is the system I am looking at running, syborg tt is also using this system.
Also check out this article http://www.hotrodheaven.com/tech/brakes/brakes3_index.htm
Hope this helps you out

[white00s10]

Hammerhead's Hydroboost kit?

[biglouie_underpressure]

Do you have a 1st gen or 2nd gen? All you need for 1st gens is find the block-off plate & get the manual master. 2nd gens aren't going to be as easy.
have any pics of the hydro boost kit

[Hammer Head]

http://s10planet.com/forum/showthread.php?t=5892

If you click the link in my sig & go down two posts you'll find this very same link. ;)

[biglouie_underpressure]

no powersteerin.....anyone has a list for manual brakes