PDA

View Full Version : pass lock problems



sonoma67a
05-03-08, 10:15 PM
I am having problems with passlock on my 01 noma 4.3. I went thru a couple of posts on here about it, but none delt with an intermentant problem. I'll turn the ignition on, the security light flashes and wont start. It doesn't happen all of the time. Ill let the truck sit for 10 to 15 min, and it will start right up.

I listed this question on another s-series forum and the only reply i got was that there is a ground that runs under the dash that might be loose, but they didnt know where the ground is located. The posts here pointed to replacing the ignition switch, or disabling it using a resistor. Where do the wires for passlock start at in the column? What are the colors of the wires?

Thanks

weezin355
05-06-08, 10:05 PM
Here is a wiring diagram from GM for the passlock sys. Hopefully this helps out.

sonoma67a
05-06-08, 10:22 PM
Thanks alot!