S-Parts Cleanout

[Mikz86TA]

Just found some stuff lying here that I dont need. Random parts for S-series.
Offers welcome, pictures availible upon request.

Defogger Switch and Panel for a 1st Gen. This is the one thats located on the bottom area of the drivers dash pod. Has the triangle-shaped mounting base, functional switch and OEM plug on pigtail. Good shape overall. 8 of 10. $5.00 + shipping

Console Harness for a 2nd Gen. Used for the automatics with floor shift. Pigtail includes Shifter Plug, Shifter Illumination Bulb and Socket, Illumination Plug and enough wire to splice near the front of the console area. $5.00 + shipping

Glovebox Lamp for a 2nd Gen (98-up). Most trucks did not come with this in them. Includes Round Dome Lens, Bulb Socket / DoorPin Assembly, Plug and a pigtail of wire to install. Easy to install, I can assist. $2.00 + shipping

Dash Blank Panels for a 2nd Gen (98-up). Used next to the center vents on NON-4WD models. This covers the opening where the 4WD switch would be. I have 2 currently. Both are Lt Pewter which is the Lt Gray color. Both are in great shape. No scratches, discoloration and tabs are perfect. $5.00 + shipping / each

Headlamp Face Panel for a 2nd Gen (98-up). The front panel on the headlamp switch accembly WITH FOG LAMPS. This panel is in great shape and has the opening for the fog lamp switch. I also have listed below a fog switch itself seperately. Will sell both together at your request. Face in great shape and tabs intact. $3.00 + shipping

Fog Lamp Switch for a 2nd Gen (98-up). In perfect shape and working order. Has pigtail and plug also included. Will sell with the above faceplate for a package deal $5.00 + shipping or seperately for $4.00 + shipping
* I also have a 2nd Fog Switch without pigtail for $3.00 + shipping


Air Temp Sensors for a 2nd Gen. These are used in conjunction with the overhead consoles with Temp Display. The A.T.Sensor goes behind the grille area. I have a few of these. No mounting clips. Sensor, Plug and Pigtail are included. $5.00 shipped / each.

If you have any questions or need pics, please feel free to ask anytime. THX

[Mikz86TA]

Drivers Side A-Pillar for 2nd Gen. Early design. I beleive 1994-1997 2nd Gens. Later ones are shaped a bit thicker in the middle. Perfect shape with mounting clips intact. Only thing broken is the alignment pin on the back. But it doesnt affect the fitment. Dk. Graphite or Dk Gray (almost black) in color. $10.00 + shipping / OFFER

[Noremac]

I will take the a-pillar! neo71665 will vouch for me lol
will you take 20 shipped on it?? if so, please let me know! paypal ready

[chevybrat]

I'm still debating on the glovebox lamp. Sounds neat and would be nice to have... What all is required with install? I'm really bad with buying things I don't need then setting them aside and not installing them haha. I still haven't installed the CD storage bin you sent me Mike, lol.

[12sws27]

If Noremac doesnt get the pillar I will. $20 shipped.

[Noremac]

back off! grrrr... oh wait.. thats not scary lol.. i really need the pillar for this little project i have going...

[neo71665]

I will take the a-pillar! neo71665 will vouch for me lol
will you take 20 shipped on it?? if so, please let me know! paypal ready


Who are you, lmao. I'll vouch for him if it means anything to ya.

[12sws27]

back off! grrrr... oh wait.. thats not scary lol.. i really need the pillar for this little project i have going...
:shake_125 lol. :D gauges? Thats what i want it for.

[Mikz86TA]

Install is easy. I have pics of the procedure. Basically its push the switch/bulb assembly in the pre-made square hole thats on the right upper edge of the glovebox opening. Push the dome/lens in the round hole just under that edge. And wire the Black wire on the pigtail to Ground and the Orange wire to constant hot. I wired both those wires to the corresponding-colored wires at the 12volt power ports (cigarette lighter plugs) at the bottom of the dash. Just was an easily accesible place and required just a few short peices of wire.

Lemme know. Install help and pics arent an issue.I'm still debating on the glovebox lamp. Sounds neat and would be nice to have... What all is required with install? I'm really bad with buying things I don't need then setting them aside and not installing them haha. I still haven't installed the CD storage bin you sent me Mike, lol.

[Mikz86TA]

That sounds fine. If you got PayPal and you transfer the funds, I have no problem getting it to you for that price.

PM me for the detailsI will take the a-pillar! neo71665 will vouch for me lol
will you take 20 shipped on it?? if so, please let me know! paypal ready

[Mikz86TA]

If you are looking for one, I can look when I go out to the junkyard.
You need Graphite right? Or does it matter what color? What year do you have?
There are some subtle differences in an earlier and later A-pillar. The top where it meets the headliner has a slightly different curvature. Also the later one has more of a outward bulge as it runs down the pillar. I think 98-up and pre-98 was the differences.:shake_125 lol. :D gauges? Thats what i want it for.

[Mikz86TA]

I SOLD one of the dash blank panels. I still have one left.

The Headlamp switch face and one of the fog switches is pending sale. But hasnt sold yet.

[12sws27]

If you are looking for one, I can look when I go out to the junkyard.
You need Graphite right? Or does it matter what color? What year do you have?
There are some subtle differences in an earlier and later A-pillar. The top where it meets the headliner has a slightly different curvature. Also the later one has more of a outward bulge as it runs down the pillar. I think 98-up and pre-98 was the differences.
its a 2000 w/tan interior. although I might get that 98 2dr Jimmy thats got Graphite colored intr. I hope the pillars or the same, but Ill take the risk and i really dont care about the color. I wont get all picky. :D

[DMP]

Fog Lamp Switch for a 2nd Gen (98-up). In perfect shape and working order. Has pigtail and plug also included. Will sell with the above faceplate for a package deal $5.00 + shipping or seperately for $4.00 + shipping
* I also have a 2nd Fog Switch without pigtail for $3.00 + shipping

This is pending right? Any pics?

[Mikz86TA]

DMP - Yeah, I have a guy interested in the face, switch and plug. But I think he wants to use them to convert a std switch panel to a fog switch panel. Im unsure if thats possible, but it may be. I have to investigate it further. But its weird, he also said its for his brothers Xtreme which they are adding fogs. ???? If its an X, it should already have fogs. So Im waiting on his response.
Lemme know if youre interested.

12sws27 - I guess color doesnt matter if you are looking to make pillar pods. They used to make those pre-formed add-on pods, but the shape of them probbaly doesnt match the s-series a-pillar form. Ive done some custom fibberglassed pods B4. But after that you have to wrap the peice anyways in some vinyl or fabric. So color isnt an issue in that case.
Just tell me what route you are going and if color is an issue. Ill check to see what I find.

[Mikz86TA]

Heres a pic of a gague pod I made for the 98-2002 Console conversion I did in my 86 Trans Am. I have a dual pillar pod and needed a 3rd gague. So I found this spot perfect for a 2 1/16 gague.
I used a flat peice of ABS plastic. I cut it to sizze for the place I wanted it, and rounded the corners.
I drilled 4 holes around tha perimiter and put 4 small fine thread bolts through the plastic. I used epoxy to hold tham in place. These were used to securely mount it to the console.
I went to Lowes and bought a short 2-3" peice of PVC pipe that fit the 2 1/16 gague snugly. Actually it worked out really well.
I cut a round hole in the ABS sheet fot the PVC to sit down into. I angled the PVC how I wanted it to be so that I could easily see the gague in the drivers position. I epoxied the PVC pipe peice to the ABS sheet.
I drilled 4 corresponding holes on the console for the bolt-studs to go through and used nuts to secure the pod in place to the console.
After I test fit everything, I used Evercote KittyHair to fill in and form the shape I needed. If you ever used KittyHair, you know what this stuff can do.
It took more time to sand and shape the curved form I desired to have than it did for the rest of the fabrication.
Once I was done, I had a custom angled 2 1/16 gague pod.
http://i157.photobucket.com/albums/t43/Mikz86TA/Car/Interior/TA-ConsolePod2.jpg

http://i157.photobucket.com/albums/t43/Mikz86TA/Car/Interior/TA-ConsolePod3.jpg

[12sws27]

On second thought Mike, I just found a 3 gauge pillar on ebay. I gonna go that route so i dont have to do anything but put it on. I have one of those 2 gauge pods all ready. But it screws on. I didnt what to put screws and cut holes in the one I had now. So I wanted an extra incase i every sell the truck. I didnt know there was a whole pillar out there that would fit.

[Mikz86TA]

Good find. I never saw one either. The AutoMeter ones are nice but not perfectly matched. Post a link.

[Noremac]

payment sent for the a-pillar... oh crap! pm sent back!

[DMP]

DMP - Yeah, I have a guy interested in the face, switch and plug. But I think he wants to use them to convert a std switch panel to a fog switch panel. Im unsure if thats possible, but it may be. I have to investigate it further. But its weird, he also said its for his brothers Xtreme which they are adding fogs. ???? If its an X, it should already have fogs. So Im waiting on his response.
Lemme know if youre interested.

I actually just need the switch. I have one, but im not sure if it works right. When I press it...it kinda gets stuck. Im not sure if thats how its suppose to be or what.

[12sws27]

Good find. I never saw one either. The AutoMeter ones are nice but not perfectly matched. Post a link.
http://cgi.ebay.com/ebaymotors/94-02...spagenameZWDVW (http://cgi.ebay.com/ebaymotors/94-02-CHEVROLET-S10-TRIPLE-GAUGE-PILLAR-POD-95-96-97-98_W0QQcmdZViewItemQQcategoryZ46100QQihZ004QQitemZ 140240483490QQrdZ1QQsspagenameZWDVW)

[Mikz86TA]

Let us know how that looks and works.

[Noremac]

"It fastens directly to stock pillar, and it holds three 52mm..." if you are expecting that to replace the entire pillar.. you are wrong.. this one screws to the pillar just the same as the two gauge ones do..

[Mikz86TA]

I have 2 switches for fogs. Do you need one?I actually just need the switch. I have one, but im not sure if it works right. When I press it...it kinda gets stuck. Im not sure if thats how its suppose to be or what.

[DMP]

I have 2 switches for fogs. Do you need one?

Yeah I just need to see a pic to make sure its the right one. Im sure its right.

[Mikz86TA]

Attached pic of the fog switch without pigtail
I also have one with pigtail

[12sws27]

"It fastens directly to stock pillar, and it holds three 52mm..." if you are expecting that to replace the entire pillar.. you are wrong.. this one screws to the pillar just the same as the two gauge ones do..

you know i just notice that right after i posted the link. right now im in the process of trying to get another truck (98 2dr jimmy) so i cant buy nothin, YET :D

[Mikz86TA]

Try this again

[Noremac]

did you ever get pics of that a-pillar for me? i really need to know what it looks like lol since you have my money already

[Mikz86TA]

Ill get them tomorrow. Sorry, Its raining today and I cant work on the truck outside.

[Noremac]

thats fine.. i am just wondering about getting a little money back if its not what i need... sorry for the mix up..

[Mikz86TA]

Ill refund all your money brother if its not what you need. No worries there. I cant do anything about what PayPal charges for their transfer funds fee tho. Im actually not sure how that works. They took their fee from what you sent to me and Im sure they will take some with me refunding you as well. But well burn that bridge when we get there. Ill get some installed and side by side compariason pics.

[Mikz86TA]

PMed you. It wont work so Ill update the ad.
Sending you your funds back tonight after i get home and on a secure line.

[Noremac]

i didnt recieve a pm, but keep 5 bucks man for your troubles.. sorry about that.

[Mikz86TA]

OK. refund should be done by the time you read this. PayPal says all money including fees would be refunded. They charged me $0.88 on that transaction. So hopefully you will receive the entire amount paid $20 back into your account.
Im refunding it all. I appreciate your offer of $5 for the trouble, but it wasnt any trouble and I dont operate that way.
Im sorry it didnt work out. Wish I knew B4 hand on the differences, but now I do. =)
Check out from time to time. Its one of those things I can easily get if I find one availible. Im going back out to the yard in the next few days. Ill check on one for a later year.

[12sws27]

what was the differences?

[Mikz86TA]

Just where the newer one starts up the pillar above the dash, it bulges out more. This allows clearance for the wires seemingly. The result of that bulge also goes to the headliner area. The factory later headliner is cut off further back and lower. In other words, the older a-pilllar has to mash the newer headliner in at the top which crinkles it and the pressure pops the a-pillar panel back out.
However all the clips are the same on both and down the side of the dash where the upper part of the kick panel and the lower part of the a-pillar meet are perfect. I took a pic but erased them. Cause it didnt do any justice to seeing what the issue was.

[12sws27]

Just where the newer one starts up the pillar above the dash, it bulges out more. This allows clearance for the wires seemingly. The result of that bulge also goes to the headliner area. The factory later headliner is cut off further back and lower. In other words, the older a-pilllar has to mash the newer headliner in at the top which crinkles it and the pressure pops the a-pillar panel back out.
However all the clips are the same on both and down the side of the dash where the upper part of the kick panel and the lower part of the a-pillar meet are perfect. I took a pic but erased them. Cause it didnt do any justice to seeing what the issue was.
So thats why the pillar pod in summit only list them to 98. i was wondering what the differance was.

[Noremac]

thanks a lot man.. i got like 19 bucks back, but no worries..

but yeah, the junkyards around here are very... um... lets say proud of their stuff... a third brake light cover, just hte cover was gonna be 30 bucks... their pricing manual was an lmc truck catalog.. i came home, and found i can get a new one for 30 from them... stupid rip off artists

[Mikz86TA]

Hmm. It said youd get it all back. They took out 88 cents from your transaction to me. Is that what you got back? $20 - .88 ?

[Noremac]

yeah 19.12... oh well... since ebay bought paypal, everyone is getting screwed lol'


it was worth the 88 cents to see why that pillar wouldnt work lol

[Mikz86TA]

Guess so. Sorry

[Mikz86TA]

Now heres something I found.
As I posted in correction, there is a break somewhere in year-model that the earlier design and later design a-pillar differences. IMy 2003 has the bulgier late design. So I was assuming the earlier one wouldve been from a 1994-1997 model and they probably changed it with the dash change.
But hang on! I found a 1998 (new dash and exterior) with the same thinner designed a-pillar. It was an ext cab with 3rd door, IDK if that matters.
IM still looking into it more :D what was the differences?

[Noremac]

hmmm... so now what?? i dont know the difference between the two.. i dont know if mine is the skinnier version, or the bulged version :( gm must have found spare parts in their warehouse and thought,"hmmm we can make a truck from a few pieces of metal and a bucket of assorted screws..."

[Mikz86TA]

Bump

[1low_s10]

the console harness wouldnt work on a 98 5 speed manual would it?

[1low_s10]

* I also have a 2nd Fog Switch without pigtail for $3.00 + shipping


Air Temp Sensors for a 2nd Gen. These are used in conjunction with the overhead consoles with Temp Display. The A.T.Sensor goes behind the grille area. I have a few of these. No mounting clips. Sensor, Plug and Pigtail are included. $5.00 shipped / each.

If you have any questions or need pics, please feel free to ask anytime. THX
will this work and fit on a 2.2 4 banger if so Im interested!

[Mikz86TA]

Console harness is for AUTOs with floor shifter. It attaches to the shifter to show the transfer info about what gear the auto shifter is in. Theres also the light for the shift indicator.

IDK if you are asking about the Fog Switch or the Air Temp Sensors. Let me know which.