What body mods do you have?

[BlazinLow_inORE]

Just wanted to know the body mods that everyone has done... rollpan...light.. etc?

Im a new member and have a couple mods... just trying to see what everyone else has

[T Man]

Rust!!!!!!!!!!!!!!!

[PitchBlackBlzr]

some stickers and now I just recently recieved a butt load of mud from all the rain we got in the last 2 days!LMFAO!

[T Man]

did i mention scraches? Scraches and rust, plus some oxidation. the old biotch is cherry!

[BlazinLow_inORE]

well here are some pics of my current modification....

[importmaster1300]

rollpan, clear corners ,strobes, red undercar neons, big red bowtie on the back window, shaved emblems, tyc tails, and fog lights.

[PitchBlackBlzr]

that hood mod is killer!

[XxInFaxX]

yeah, i like the hood

[T Man]

i dont think i have ever seen a tilt hood on an s truck. that is bad ***. How complicated was the conversion?

[BlazinLow_inORE]

it actually took one day.... i took a hinge kit off of a 88 buick lasabre.... drilled some new holes... and mounted it... I had to reposition my overflow reservoir for my coolent so that the hinge did not hit it.... it took me about 3 hours to complete.... with all fabrication.... there is a how to on this modification... i will find the link and post it up on here is you guys are interested

[T Man]

definately put that up here as soon as you can

[Importh8tr]

BlazinLow_inORE -
I like that Avitar you used, they look hella good, nice and juicy!!! Oh yeah, I liked the hood too, looks good... :vampire_1

[Importh8tr]

Oh, can my wife possibly get body mods like hers??? Yeah... :D

[T Man]

the more i look at the boobs the more they look like my ex girlfriends. she was a ***** and she f ucked around on me but man did she have nice boobs

[Importh8tr]

Yeah, missing the ex, huh T Man? Or are you just missing the boobs???

[T Man]

A smart man once defined the difference beteween a p ussy and a c unt. a p ussy is the area between the legs used during sex. a c unt is everything else. she was a c unt, just missing the boobs, id rather get hit in the face with a brick than even talk to her again.

[Blazer69]

hey pitchblack got any nice pix of ur truck? looks nice in the avatar just can't make it all out.....i'm always looking for other guys with 2door 4x4's....not alot....least not on the forums i've been too...lol

[PitchBlackBlzr]

o0o0 cant believe i missed this post...but anywho..no not yet...still in process of even gettin a digi-cam...may just have ta go out an buy a disposable then have em put em on cd cause my scanners on the fritz and cant scan nuthin right now.

[ZR1-S10]

I've got new headlights, foglights, and taillight covers. I've spent most of my time uping the power of my engine but now that I've got tracton problums I'll move into the body mods. Hoping to get a grill inserts, new Cal-vue mirrors, and a hard bed cover within the next month.

[Mike 92S10]

New sheet metal in the front. Cowl hood. Removed all the trim. Alteeza's. New foglights. New paint. New rims and tires. I just finished it up a couple of months ago. Oh, it's a '92 S10. I'll post some pics in the gallery when I learn how.

[Mike 92S10]

O.K. got the pics in the photo album. Let me know what you think. All new metal in the front including the doors. Did the paint myself. First time I ever painted a vehicle. I want to do something else to make it stand out but can't decide what to do. Maybe ghost flames or something like that. Any ideas anyone?

[Minitrucker4lyfe]

None as of yet.

[Supercharged-ZQ8]

Body mods. . . Hmm. . .
*The graphics were on it when I bought it (otherwise they wouldn't be on it, but my wife will kill me if I remove 'em).
*Swapped out the grille (instead of the 2 bezel grille I have the horizontal-slat grille -- air flows through it better. . . Better cooling, more flow over the radiator and oil cooler).
*Clear corner lenses.
*Removed the factory emblems and replaced them with polished billet Bowties.
*Polished billet third-brake light cover.

That's all that I can remember at this point. . . Most of my mods are mechanical or audio related.

[importmaster1300]

Update shaved door handles and 3rd brake light. and c/f bowtie and a Sicgmtrucks sticker

[BlazinLow_inORE]

^^^ lets see the handles...

[importmaster1300]

All I have is the filler plates held on the back side by some speed tape till the 1st.
That is when I rent a wirefeed welder. Then I will take pics.

[Maximus]

I have new rims and tires.I removed the chrome honeycomb grill and installed a black honeycomb grill.Then took out the gold chevy emblem and installed the black and red SS emblem.Removed the wheel well chrome trim.I have black ones to replace them I just have not installed them yet.I have a rollpan but it's still in the box.Im waiting till I get a cowl hood before I install the rollpan and wheel trim.Because im gonna paint the whole truck then.Oh and I have limo tint on all the windows.That's about it.

[LayItLowS10]

haha i just noticed you changed your name max when u switched over

[s10blazed]

This first picture is how it sits now. I have the GMC hood and a GMC 4x4 bumper cover (not on in this pic) with the Oldsmobile Grill and headlights. I have the rear end shaved with an FBI full skin with LEDs in the rear pan. I have also shaved the handles and the antenna. If a big humongous hole in the bed counts as a mod, that's also done. I also would say my license plate/ tail light assembly is a bit off from stock. I don't have any pics of it handy, just a short video I made it. http://www.blazinlow.com/s10blazed/taillightthingy03.wmv .

http://www.blazinlow.com/s10blazed/truck%20with%20front%20end%20assembled.jpg

This is an older pic when I had the full phantom front and the Goodmark Cowl hood. I think it was an omen when I was hit to get rid of it. I got alot of hassle for the grill about covering the lights.
http://www.blazinlow.com/s10blazed/drag03.jpg

Different angle...
http://www.blazinlow.com/s10blazed/done.jpg

This is my skin with the LEDs. Since this pic I have added the tail light popper upper thingy in the video up above.
http://www.blazinlow.com/s10blazed/skinleds.jpg

[Maximus]

haha i just noticed you changed your name max when u switched overYeah I decided to change the spelling.I have had it spelled wrong the whole time and just decided to change it to the right way.But its still the same old me lol.

[BlazinLow_inORE]

nice s.... looks great. what exactly did u do to get the lights to pop up?

[s10blazed]

nice s.... looks great. what exactly did u do to get the lights to pop up?

The lights are OEM Wrangler lights. I built the housing for them and the plate out of raw mild steel. I used 8" barndoor hinges from lowes as the pivot mechanism. For the actuation I recycled the air shocks I used to have on the rear. Since I already have the air system on-board, I just plumbed in a 75 psi regulated line to them and voila. Here is a pic I found from during the mock-up phase.


http://www.blazinlow.com/s10blazed/tailgatefromcab02.jpg

1. Gabriel Hi-Jacker rear shocks for any S-Series 82 - 03
2. Big spring i got from Lowes to keep tension on the assembly in the "down" position and also to return it (pressure against the shocks) to put it back down. (Although it's own weight does most of the work)
3. Hammer I forgot to put away
4. Fill valve
5. Dump valve
6. Tires I smoked off

[Maximus]

Now that is some handy work right there.Do you have rigged to come up off a switch or when you break.That is just crazy cool as hell.

[s10blazed]

Now that is some handy work right there.Do you have rigged to come up off a switch or when you break.That is just crazy cool as hell.

Since it also houses my license plate it has to be visable while the vehicle is in operation. The whole reason I built it was to remain legal on the road. So that means I have to leave it up. But I love the smooth look so much, I gotta put it down while parked.