d-rock
08-12-08, 11:43 PM
hey guy i have 1 10 inch rockford fosgate (p1) about 6 7 months old in a bassworks box for sale. i am saling this item be it is just a bit to big to do what i wanted to do with it 80. i am also saling 1 alpine v power amp 200. and 1 sony amp 50 bucks. ill post some pic tomorow
rockford: DescriptionValueCEA-2031 Complianthttp://www.rockfordfosgate.com/products/assets/CEA-2031_icon.gifSize10"Impedance4-OhmPower Handling150 Watts RMS
300 Watts MaxVoice Coil Diameter1.5" 6-Layer
(3.81 cm)Motor Size40 oz.Speaker ConnectorDual 10 AWG compressionSPL (1W/1M)84 dBMounting Depth5.125 in.
(13.02 cm)Shipping Weight11.10 Lbs.
(5.03 Kg.)Rec. Sealed Enclosure0.59 cu. ft. (16.42 liters)
Range: 0.50 cu. ft. - 0.85 cu. ft.
Range: (14.16 liters - 24.07 liters)Rec. Vented Enclosure1.40 cu. ft. (39.64 liters)Vented Tuning Frequency37 Hz
Port: (1) 3" diam. x 8" long
Port: (1) 7.62 cm x 20.32 cm
alpine:
SPECIFICATIONS
General
• Signal to Noise: 100dBA
• Speaker Impedance: 4 or 2 Ω
• Frequency Response: 20 -200Hz (200Hz/-3dB)
• Input Sensitivity: 0.2 - 4.0V
• Power Requirements: 14.4V DC (11V to 16V)
Dimensions
• Heat Sink (WxHxD) in: 8-17/64'' x 2-23/64'' x 9-33/64''
• Heat Sink (WxHxD) mm: 210mm x 60mm x 242mm
• Foot Print (WxHxD) in: 10-5/8'' x 2-23/64'' x 9-33/64''
• Foot Print (WxHxD) mm: 270mm x 60mm x 242mm
Sound Tuning
• Subsonic Filter: 15Hz (Fixed), -24dB/oct.
• EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz 0 to +12dB
• Crossover: 50Hz-200Hz, -24dB/oct. (Low-Pass)
RMS Power Ratings
• Per channel into 2 Ohms: (@ 14.4V ≤1%THD+N, 20Hz - 200Hz) 500W x 1
• Per channel into 4 Ohms: (@ 14.4V ≤1%THD+N, 20Hz - 200Hz) 300W x 1
CEA-2006 Power Ratings
• CEA-2006 Power Rating: (4 Ω @14.4V ≤1% THD+N, S/N: 75dBA, ref:1W into 4 Ω) 300W x 1
sony amp: cant find any think on it. but 1000watts 500 rms 4 channel works great
rockford: DescriptionValueCEA-2031 Complianthttp://www.rockfordfosgate.com/products/assets/CEA-2031_icon.gifSize10"Impedance4-OhmPower Handling150 Watts RMS
300 Watts MaxVoice Coil Diameter1.5" 6-Layer
(3.81 cm)Motor Size40 oz.Speaker ConnectorDual 10 AWG compressionSPL (1W/1M)84 dBMounting Depth5.125 in.
(13.02 cm)Shipping Weight11.10 Lbs.
(5.03 Kg.)Rec. Sealed Enclosure0.59 cu. ft. (16.42 liters)
Range: 0.50 cu. ft. - 0.85 cu. ft.
Range: (14.16 liters - 24.07 liters)Rec. Vented Enclosure1.40 cu. ft. (39.64 liters)Vented Tuning Frequency37 Hz
Port: (1) 3" diam. x 8" long
Port: (1) 7.62 cm x 20.32 cm
alpine:
SPECIFICATIONS
General
• Signal to Noise: 100dBA
• Speaker Impedance: 4 or 2 Ω
• Frequency Response: 20 -200Hz (200Hz/-3dB)
• Input Sensitivity: 0.2 - 4.0V
• Power Requirements: 14.4V DC (11V to 16V)
Dimensions
• Heat Sink (WxHxD) in: 8-17/64'' x 2-23/64'' x 9-33/64''
• Heat Sink (WxHxD) mm: 210mm x 60mm x 242mm
• Foot Print (WxHxD) in: 10-5/8'' x 2-23/64'' x 9-33/64''
• Foot Print (WxHxD) mm: 270mm x 60mm x 242mm
Sound Tuning
• Subsonic Filter: 15Hz (Fixed), -24dB/oct.
• EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz 0 to +12dB
• Crossover: 50Hz-200Hz, -24dB/oct. (Low-Pass)
RMS Power Ratings
• Per channel into 2 Ohms: (@ 14.4V ≤1%THD+N, 20Hz - 200Hz) 500W x 1
• Per channel into 4 Ohms: (@ 14.4V ≤1%THD+N, 20Hz - 200Hz) 300W x 1
CEA-2006 Power Ratings
• CEA-2006 Power Rating: (4 Ω @14.4V ≤1% THD+N, S/N: 75dBA, ref:1W into 4 Ω) 300W x 1
sony amp: cant find any think on it. but 1000watts 500 rms 4 channel works great