Should I,,,could I,, Extreme my Blazer.

[Bad Ramer Jamer]

I have a 95 4x4. It's lowered 3/3. I've got some 18's on there too. :D It look's alot better than stock right now. However, I'm as low as I care to go with it being a 4x4. The problem is I can see the frame. I do have a partial Extreme kit I took of a 04 Blazer at the junk yard. I'm just dying to put it on there.

I'm planning on doing the 98+ front end conversion too. There are a few thing's really holding me back. The first is I really don't like the way the Extreme air dam flip's out at the bottom, just in front of the tire. Is there anything else that will line up with the Extreme wheel flare's. The second is I can't find out if I can use the 98-04 roll pan/step shaver kit on my 95. Does anyone know if it will work. Then there's the whole front bumper deal. Will the 98+ bolt up to my 95, or do I have to change the mounting bracket's.

I guess the biggest thing I'm worried about is how will a 4x4 look as an Extreme. What do you guy's think. Should I do it, or say screw it. :screwy:

Here's the roll pan kit I like, but it say's it won't fit my 95. But I'm thinking that's just because it's for a 98-04. I'm hoping it will still bolt up. :confused:

http://www.stylintrucks.com/part.aspx?partid=499147&key_word=rp982x

[firefighter]

I got that pan and it fits fine there are some bubling issues with the adhesive they use I guess they fixed it though. The front end you may look into the Street Scene SS bumper it should line up I've been thinking about getting it for my Xtreme.


http://www.stylintrucks.com/parts.aspx?category%7ccategory_root%7c-25=Exterior&category%7ccat_-25%7c300=Bumper+Covers+%26+Air+Dams&canned_results_trigger=&partfamilyid=5506

[Mikz86TA]

Pic of your truck

[12sws27]

You can get that pan cheaper straight from http://www.eastcoastcustoms.com/.

[s10shop]

The front frame horns are the same for mounting the bumper. There is a 4WD truck running around here that has the Xtreme bumer and ground effects and it looks stupid, BUT ....his is raised, not lowered ....I think it would look good lowered.

[spideyjected]

I'd say sell it and get an xtreme myself.

[BlazerManZQ8]

I have a 95 4x4. It's lowered 3/3. I've got some 18's on there too. :D It look's alot better than stock right now. However, I'm as low as I care to go with it being a 4x4. The problem is I can see the frame. I do have a partial Extreme kit I took of a 04 Blazer at the junk yard. I'm just dying to put it on there.

I'm planning on doing the 98+ front end conversion too. There are a few thing's really holding me back. The first is I really don't like the way the Extreme air dam flip's out at the bottom, just in front of the tire. Is there anything else that will line up with the Extreme wheel flare's. The second is I can't find out if I can use the 98-04 roll pan/step shaver kit on my 95. Does anyone know if it will work. Then there's the whole front bumper deal. Will the 98+ bolt up to my 95, or do I have to change the mounting bracket's.

I guess the biggest thing I'm worried about is how will a 4x4 look as an Extreme. What do you guy's think. Should I do it, or say screw it. :screwy:

Here's the roll pan kit I like, but it say's it won't fit my 95. But I'm thinking that's just because it's for a 98-04. I'm hoping it will still bolt up. :confused:

http://www.stylintrucks.com/part.aspx?partid=499147&key_word=rp982x

Just do it and if you don't like it then sell it on ebay or somethin.

[12sws27]

Damn That Blazer/Jimmy pan went down in price alot! Now it cheaper than you can get it straight from Eastcoast. Of course this type of stuff only happens when i cant afford it :(