Partin' out my 84 s10 Durango Xcab 2.8 5sp 4x4

[sullymatty]

Repeating some info from my original post titled "5 speed 4 sale for 84 S10-NEW (not rebuilt)". Since I sold the 5 speed & clutch, it's time to start a new post with a better title.
- - - - - - - - - - - - - - - - - - - - - - - - -
Time to part out my rusty ole '84, so let me know what you need.
- rebuilt Eaton posi unit
- 2 good condition front CV axles
- fold down roof mount lite bar, new in box
- saddle headliner for 84 x-cab. new in box
- OEM window felts set of 4, new in box
- eurothane front diff mounts. new in box
- front wheel bearings. new in box
- 2 oem rear slider widows.
- Extra front diff in my garage, w pass side axle replaced.
- Couple aluminum skid plates.
- Crappy but serviceable aluminum bed cap.
- 2 so-so but working tail gates.
- grill guard (surface rust) is servicable
- good condtion grill/headlight bezels, tail lights,
- new license plate lights.

2.8 crate motor from Jasper rebuilds. Less than 10K on motor, been in truck for 8 years. Was never my main ride, so miles are low. Runs strong with Edelbrock 4bbl intake/headers. Carter 400 4bbl. X11 high lift cam. The orig 5 speed in truck is mostly cooked, but works. Front diff works. Full guage cluster, AC controls and components. Nice AC dash in brown. Full set tan vinyl jump seats with hardware, some stains. Nice Pioneer 50W x 4 CD/MP3. 4x6 Pioner high out speakers for rear. Lighted rear-view mirror.

Crusty, but serviceable tan bucket seats with decent aftermarket covers. Black 5spd center console, decent shape, pad curling. Decent tan bench seat. Some 3 year old stuff: gas tank (20gl), fuel lines, pop-out window seals, and parking brake cables. Partially installed complete new body mount kit, mostly still in box due to rusty box nuts. Has nice tilt steering column w/delay I put in, but the firewall mount is incorrect (small gaps) for my year - from later model year.

This truck currently has the 4x4 five spokes (decent cond) on it with s#*t tires. Wheels as seen in sig pic have new off brand tires. Local pick-up in Detroit area. Hell, I'll even drive it over to your place, you can hear it run, take the whole truck for $800. Will dig round see what other parts laying about the attic and garage, and add em on. - matt

[sullymatty]

if the price is right...:D

How about $200 plus shipping?

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000861.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000862.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000863.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000864.jpg

[sullymatty]

Here's dash pics, it's up for grabs. Someone has asked for the cluster. I have another good cluster, but without full guage package.

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000853-1.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000849-1.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000851-1.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000850-1.jpg

['94 Big Blaze]

whats the gear ratio on that unit ?

[sullymatty]

whats the gear ratio on that unit ?

no gears dude, just the posi unit, as is, in pictures. Unit is the same regardless of which gears used. Pretty sure whatever gear set you already have can be used with a posi unit, unless they are trashed. This one fits the smaller 7.5in rear end like my 1st Gen S10 has. Not sure where else it can be used. Check around with other members if you have questions, or different truck, as I'm no tech expert.

['94 Big Blaze]

no gears dude, just the posi unit, as is, in pictures. Unit is the same regardless of which gears used. Pretty sure whatever gear set you already have can be used with a posi unit, unless they are trashed. This one fits the smaller 7.5in rear end like my 1st Gen S10 has. Not sure where else it can be used. Check around with other members if you have questions, or different truck, as I'm no tech expert.

thanks that what i was looking for :D let me see what i can do.

[white00s10]

price on the grille guard setup with shipping too 14011

And if your parting the front end.. how much for that header panel that goes between the bumper and the grille.. and the bumper?

[neo71665]

price and pics of the light bar shipped to 71665

and whats a price on the skid plates, doubt I get em but still, lol

[em98ss]

Price & S/H to 64504 on the rear window

[spideyjected]

Do you by any chance still have the durango fender badges? Are they in ok shape?

[sullymatty]

Do you by any chance still have the durango fender badges? Are they in ok shape?

The 2 on the truck are OK, will take pics. However I do have 1 on my shelf, a brand new mint NOS. I haven't ever been able to find a 2nd one.

[sullymatty]

gimme a couple days to reply...busy after work 2day.

[sullymatty]

price on the grille guard setup with shipping too 14011

And if your parting the front end.. how much for that header panel that goes between the bumper and the grille.. and the bumper?

gimme a couple days to reply...busy after work 2day.

[sullymatty]

price and pics of the light bar shipped to 71665

and whats a price on the skid plates, doubt I get em but still, lol


gimme a couple days to reply...busy after work 2day.

[sullymatty]

Price & S/H to 64504 on the rear window

gimme a couple days to reply...busy after work 2day.

[Tink]

Would you be willing to sell the glove box door? The one on my 83 Durango is damaged...

[stealthsuper]

DAMNIT I cant find a master cyl. clutch pedal assembly anywhere I saw thats your is gone.

[sullymatty]

Would you be willing to sell the glove box door? The one on my 83 Durango is damaged...

Holding out to sell the whole dash assembly, but stay tuned. Might sell piece at a time.

[sullymatty]

DAMNIT I cant find a master cyl. clutch pedal assembly anywhere I saw thats your is gone.

Not so fast. I sold a new clutch kit in it's box. What are you looking for exactly? Clutch/brake pedal assembly? Still on truck. Hydraulic clutch slave cylinder? Prob 5 years old. Brake master cylinder is old. For either cylinder i would buy new locally, not used. - matt

[sullymatty]

Got all my pics taken today. Details to follow... Some of this stuff will take a while to get off the truck, as it's way cold here. As in bumper/header. Fender badges look tough, unless I remove fenders. Pics and more info to come. - matt

[stealthsuper]

I am Looking for a clutch pedal assembly and master slave cylinder for my Tremec 5 speed Hammer Project.. I am having a hard time finding one.

[neo71665]

still wanting to see and info on the light bar.

[sullymatty]

still wanting to see and info on the light bar.

It's a black rotating bar (folds down forward) with 5 lite capacity. Still in the unopened box.

Goes for $178 new, how bout $100 plus shipping. UPS store here in Royal Oak says $17.80 to 71665. p.s. I never mark up shipping.

If you want me to pull it out I can. You can see it and check out pricing here at the CARR site:
http://www.carr.com/store/carrdeluxerota.asp

p.s. headin out of town on Thurs...2 weeks.
http://i73.photobucket.com/albums/i216/sullymatty/S10/RotaAnimation.gif

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000883.jpg

[sullymatty]

I am Looking for a clutch pedal assembly and master slave cylinder for my Tremec 5 speed Hammer Project.. I am having a hard time finding one.

I certainly have the pedals, as long as your not in a major hurry. Ya see it's like 23 degrees here today, with more to come. No heat in garage. So any major dismantling efforts will likely need wait a while.

As for the clutch slave, you can get anywhere. If you really want a used one...

Also I'm leaving town for 2 weeks this Thursday. -matt

[stealthsuper]

Ok I will possibly wait a bit.. but I do need it within the next month.. I guess I will just try to find one elsewhere . Thanx anyway..

[sullymatty]

price on the grille guard setup with shipping too 14011

And if your parting the front end.. how much for that header panel that goes between the bumper and the grille.. and the bumper?

I can prob get the grille guard off with out too much trouble, but the bumper/header might take a while. It's way cold, no heat, no torches. We'll see, maybe they'll just unbolt easy...right! Bumper and filler $100 plus shipping.

This grille guard goes for like $199. How about $80 plus shipping. Can't get that shipping quoted till i pull it off and weigh it. If you want it I will remove it, shipping never marked up, only what they quote me.

Also I'm leavin town for 2 weeks on Thurs. - matt


http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000867.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000868.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000869.jpg

[sullymatty]

Price & S/H to 64504 on the rear window

This is in overall good shape, but there are tiny specs on passenger glass you see looking up close that I wasn't told about when I bought it. Don't wanna come off with windex. Like maybe welding flash? See last pic.

Anyway minor scrapes/wear n tear etc, the latch is solid. How about $70 plus $13.93 ups ground.

Also heading out of town for 2 weeks on Thursday. - matt
http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000877.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000884.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000878.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000885.jpg

[sullymatty]

Do you by any chance still have the durango fender badges? Are they in ok shape?

They're in OK shape. Not sure how to get them off without taking off fenders. Or maybe sawz-all around em. Can only see 1 nut from under hood. 2 on each one. Pass side inaccessable.

How about both old ones for $40. New one...$60. Plus ship.

Fender flair $30 plus ship.

Also leaving town thurs for 2 weeks. - matt
http://i73.photobucket.com/albums/i216/sullymatty/S10/flare_.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000865.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000866.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000889.jpg

[sullymatty]

Here you go Matt.

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000870.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/IM000871.jpg

http://i73.photobucket.com/albums/i216/sullymatty/S10/tail_lites.jpg

[Hammer Head]

I asked for the cluster & bezel but your truck is too old. I need the newer style 1st gen gauges.

[sullymatty]

I asked for the cluster & bezel but your truck is too old. I need the newer style 1st gen gauges.

Ebay has one for auto...also saw a few more from 86-92: click here (http://cgi.ebay.com/ebaymotors/S-10-Instrument-Cluster-fits-1985-1992-Automatic_W0QQcmdZViewItemQQ_trkparmsZ72Q3a543Q7c6 6Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c 293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhash Zitem320325516625QQitemZ320325516625QQptZMotorsQ5f CarQ5fTruckQ5fPartsQ5fAccessories)

- matt

[NaturalRaptor]

Thanks for the pics Matt. I will show them to my Dad this weekend and get back with you. Have a nice trip. :thumbup_1

[neo71665]

It's a black rotating bar (folds down forward) with 5 lite capacity. Still in the unopened box.

Goes for $178 new, how bout $100 plus shipping. UPS store here in Royal Oak says $17.80 to 71665. p.s. I never mark up shipping.

If you want me to pull it out I can. You can see it and check out pricing here at the CARR site:
http://www.carr.com/store/carrdeluxerota.asp

p.s. headin out of town on Thurs...2 weeks.


Hmmm, They are $105.50 shipped on fleabay.

http://cgi.ebay.com/ebaymotors/Carr-LIGHT-BAR-chevrolet-S10-82-93-92-91-90-89-88-87-86_W0QQitemZ270316932884QQihZ017QQcategoryZ42613QQ ssPageNameZWD1VQQrdZ1QQcmdZViewItem

You have the mounting kit for a s-series? Willing to do $100 shipped?

[white00s10]

how do those fit on the cab?

i assume they bolt on and can also be used on jimmy's / blazers?

and nm on the front end peices.. thanks, but i found what i needed at the boneyard

[88Jimmy]

How much for the Pioneer headunit, 4x6's, 4x10's, and black fender trim flairs?

[sullymatty]

how do those fit on the cab?

i assume they bolt on and can also be used on jimmy's / blazers?

They mount to the gutters. If you look at the CARR site, there's a pic. Also same part number for multiple vehicles, with no specific mounting kit required. So yes to blazers.

$100 shipped is fine with me. The $178 amount comes from CARR site. Wish I had only paid $100!

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hold the phone...just realized we don't have gutters. So I just looked it up on CARR site...you were right to ask for S10 mounting kit. Yes there is a gutterless kit required: 220042 - Gutterless Mount Kit, Mount kit for vehicles with internal gutters is required to install on S10. I never ordered it. If I had ever tried to install, I would have found out real quick.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

[sullymatty]

How much for the Pioneer headunit, 4x6's, 4x10's, and black fender trim flairs?

How about $160 for Radio and 4 speakers? Pretty sure i have Alpine 4x6 in front. Rear speakers are 4x10 like you said, think pioneer, or at least a major brand. Shipping should be under $10. If you're interested, I can remove from truck and take pics.

CD/MP3 Head unit also has fold down face (removable too) for CD access. I just looked it up on web...it's a Pioneer DEH-P4600MP 50-Watt x 4. Also XM ready, controls external units, and there's even a remote. somewhere.
- matt

http://www.pioneerelectronics.com/PUSA/Products/CarAudioVideo/Source/CD-Players/DEH-P4600MP?tab=A

http://i73.photobucket.com/albums/i216/sullymatty/S10/pioneer.jpg

[sullymatty]

How much for the Pioneer headunit, 4x6's, 4x10's, and black fender trim flairs?

How many fender flairs? Someone has asked for RF, but it is not sold yet.

[sullymatty]

Hmmm, They are $105.50 shipped on fleabay.
You have the mounting kit for a s-series? Willing to do $100 shipped?

(repeating reply to white00s10 so you get notified)
They mount to the gutters. If you look at the CARR site, there's a pic. Also same part number for multiple vehicles, with no specific mounting kit required. So yes to blazers.

$100 shipped is fine with me. The $178 amount comes from CARR site. Wish I had only paid $100!

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hold the phone...just realized we don't have gutters. So I just looked it up on CARR site...you were right to ask for S10 mounting kit. Yes there is a gutterless kit required: 220042 - Gutterless Mount Kit, Mount kit for vehicles with internal gutters is required to install on S10. I never ordered it. If I had ever tried to install, I would have found out real quick.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

[87wildside]

I am Looking for a clutch pedal assembly and master slave cylinder for my Tremec 5 speed Hammer Project.. I am having a hard time finding one.
It won't fit. Not the same pedal assembly as the second gens.

[88Jimmy]

How many fender flairs? Someone has asked for RF, but it is not sold yet.

I really just need the right rear if it'll fit a blazer...

[neo71665]

$100 is fine with me but I'm not gonna be online tomorrow so contact me when you get back from your trip and I'll paypal you or however

[sullymatty]

I really just need the right rear if it'll fit a blazer...

That I don't know, but i'm pretty sure someone else here does. Either way it will need to wait 2 weeks til I get back, then we can figure out what's next. - matt

[neo71665]

I didn't think I was gonna be able to get online today but my plans got changed.

Just email me at neo71665@yahoo.com or PM me when you get back.

[sullymatty]

Hi to all...I'm back in the saddle again up here in the Meeechigan deep freeze zone. - matt

[white00s10]

how much for the grille and the header panel and the roof light rack shipped to 14011.. honestly this time.. lol i really need it

[neo71665]

Light bar is mine, pay pal process has been started.

The money has been sent!


You have sent $XXXX.XXXX USD to XXXXXXXX@XXXXX.com.

[sullymatty]

[quote=neo71665;227204]Light bar is mine, pay pal process has been started.

Didn't receive any messages till your PM this morn....PM sent.

[sullymatty]

how much for the grille and the header panel and the roof light rack shipped to 14011.. honestly this time.. lol i really need it
Would love to sell grill/header to you for $20 each...problem is getting them off truck. No heat in garage, temps in the teens (and single digits).

So if you are in a hurry, I can't help. Also lite bar was spoken for before I left town. I'm going to completely gut this truck and send carcass to the yard, but no way i can get it done in this weather....snow's up to the bumper! - matt

http://i73.photobucket.com/albums/i216/sullymatty/S10/winter_snow-1.jpg

[white00s10]

lol im in no hurry, so take your time

[sullymatty]

Light bar is mine, pay pal process has been started.
The money has been sent!
You have sent $XXXX.XXXX USD to XXXXXXXX@XXXXX.com.

Hey DJ...dropped it off at UPS Store hour ago. expected delivery is Wednesday. Will pm you the tracking num. - matt

[neo71665]

thanks

[neo71665]

Got it today was in great shape (box had seen better days). Overall pleasure to deal with.

[Hammer Head]

Still have the complete dash? If so I'll problably grab it up if the price is right. Let me know!

[sullymatty]

OK let me get my act together. The construction in my back yard is almost over...when they clear out this week i can FINALLY pull truck into garage and start taking off the goodies. Will keep you informed. - matt


Still have the complete dash? If so I'll problably grab it up if the price is right. Let me know!

[sullymatty]

p.s. This is the same clown who started my siding in late November. He finished the 2nd peak Fri. We're finally ordering the gutters today (supposedly). And still somehow this is a friend of mine.....

[Hammer Head]

PM sent