1low02
03-01-05, 10:00 PM
I am having serious problems with a friends truck, it is a 2000 sonoma excab it is a 4 cyl/auto. the prob is that he has drug through the stock PLASTIC gas tank. We are trying swap it over to a steel tank. We have a steel tank now and different sending unit(becuase the original unit was too big). The problem is that none of the lines fit and the plugs are different( the plugs i can change) i have 3 lines that came with the unit for the steel tank from the junkyard but one is cut, the long one that runs above the frame rail. i tired swapping the lines but only one is working out right. I now have no clue what to do or even what to order, any help would be greatly appreciated.
info that may be needed is that the stock unit, the 3 lines point towards the driver side frame rail where as the new steel tank unit, faces the passenger frame rail. Dont worry the ttruck is getting bagged soon with a raised gas tank cross member but it would be nice to atleast get it running first. and yes to clear up anything, this truck is retard low for a static truck.
__________________
info that may be needed is that the stock unit, the 3 lines point towards the driver side frame rail where as the new steel tank unit, faces the passenger frame rail. Dont worry the ttruck is getting bagged soon with a raised gas tank cross member but it would be nice to atleast get it running first. and yes to clear up anything, this truck is retard low for a static truck.
__________________