upper ball joints

[dbcustoms]

i was wondering if anyone has found a good heavy upper ball joint for cheap. i found some at autozone for $16 each but im afraid they arent going to hold up, especially for what im doing with the truck, i have already bent both of ym upper ball joints and i was looking for a good ball joint with a reasonable price.

[T Man]

An upper balljoint for 16 bucks? Steer well clear of that. Try Moogs problemsolver line

[12sws27]

Take a look at http://www.powerperformancemotorsports.com/main.sc

Also do some searching for powerperformance ball joints on this and the other s-series forums for reviews. Popular opinion says they're the best. They're prefered by the bagged and off roading guys.

[Jongo88]

X2.. get these and never have to replace them again...

[dbcustoms]

An upper balljoint for 16 bucks? Steer well clear of that. Try Moogs problemsolver line

where do you get the moog problem solvers? and about how much do they run?


the truck is being used in rough truck racing and being jumped, if it gets broken to bad its gettign scraped so i dont want to put to much money into it, but i dont want to put something in that will break the first time out either, i have moog ball joints in my blazer but it just goes offroad i thought maybe somebody knew of a pretty decent ball joint at a pretty reasonable price because they could be used for 5 minutes and then get scraped, it just depends how the rest of the truck holds up

and the power performance joints cost more than i have in the whole truck lol i dont want something that good(well i do but i cant afford them)

[millermccullum]

Hey Dbcustoms.
Myself Millermccullum and I read your entire posting. Welcome to the forum Dbcustoms. You should have to check the warranty status before purchasing Upper ball joints for truck. Price and quality have the same relationship so you have to compromise on it. Anyways Thanks. Stay Connected.

[oddball]

I just installed a set of the Moog problemsolver uppers on my 87 blazer and they were 29$ each at Oreallys,Yeah i know it's spelled wrong.You know what I mean!lol

[White-V-6-S-Ten]

I am gonna go with moog ball joints and a-arm bushings when i do mine in a few weeks.
I have heard alot of good stuff about moog especially compared to stock pieces

[87wildside]

moog suck!!!!!

No good since they started manufacturing off shore. Less then 10,000 on a set with synthetic grease (Green Grease).

[neo71665]

http://www.powerperformancemotorsports.com/product.sc?productId=1764&categoryId=18

[Jongo88]

I am gonna go with moog ball joints and a-arm bushings when i do mine in a few weeks.
I have heard alot of good stuff about moog especially compared to stock pieces
Moog is china shlt...

[Jongo88]

This is what I use..
http://www.powerperformancemotorsports.com/category.sc?categoryId=15

[White-V-6-S-Ten]

Well powerperformance isnt in my budget.
What would you guys suggest then?

[White-V-6-S-Ten]

I am getting ready to get all new ball joints, a-arm bushings, tie rod ends. and a steering shaft.
Plus new tires.
And powerperformance is just too much. I cant afford it.

[White-V-6-S-Ten]

Oh plus a new center link.

[87wildside]

Did anyone besides me notice it was a spammer that bumped this thread?

[87wildside]

He's banned from my forum......

[neo71665]

Hes being watched by the mods but as yet not done anything wrong so?????

[White-V-6-S-Ten]

I didnt notice that.
But i do know i hijacked this thread lol.
Sorry

[87wildside]

Google search FTW? I banned him so.....
Does anyone besides me understand these are the assholes that develop software to defeat "Captcha" and what ever? These assholes developer douchebagoware to beat the anti spam sh!t. That's why the post some stupid sh!t on every forum they can. When I was a mod he was banned along with his IP though I thi9nk they say not to do that. My fourom has only been hit once...

[Jongo88]

I am getting ready to get all new ball joints, a-arm bushings, tie rod ends. and a steering shaft.
Plus new tires.
And powerperformance is just too much. I cant afford it.
I would say for you to save up for the good stuff. But if you can't go to napa. They have some ok ones. In the long run you will pay more for the cheep stuff. It's better to save and do it one time.

[White-V-6-S-Ten]

What is the next best other than powerperformance?

[White-V-6-S-Ten]

We are on a serious budget and trying to save to get a house and get out of the hole since getting married.

[Jongo88]

I would say for you to save up for the good stuff. But if you can't go to napa. They have some ok ones. In the long run you will pay more for the cheep stuff. It's better to save and do it one time.


What is the next best other than powerperformance?
I think I said it here.

[neo71665]

Man unless you have let it get to the point its about to fall apart I would save up. Nothing beats PP and they will outlast any cheaper one you put in there. They pay for them self in longevity.