PDA

View Full Version : Wanted Passenger Side Lower Control arm


4runnerchevy
10-12-09, 09:07 AM
I need the Lower Control arm, passenger side for a 1991 4 Wheel Drive S-10 Truck. Anyone have one ? If so how much and shipped to 95018, near Santa Cruz. Needed ASAP.
trusconi
10-12-09, 09:10 AM
2wd or 4wd?
4runnerchevy
10-12-09, 09:26 AM
OOPS! 4 wheel drive
TreasonAgainstCaesar
10-12-09, 01:20 PM
kinda doubt you'll find one here. check junkyard or LMCtruck?
neo71665
10-12-09, 01:41 PM
Junkyard or ebay might be your best bets. LMC wants too much
trusconi
10-12-09, 05:12 PM
i have one off a 1993 4wd blazer i cant get the torsen bar out of it come get it it is yours.
TreasonAgainstCaesar
10-12-09, 05:39 PM
Ha, I stand corrected.

If you really want to get that out, the first things is to completely remove the torsion bar key. Have you done that? If that alone, doesn't work, try a BFH on the front side of the control arm.
neo71665
10-12-09, 05:48 PM
Heating the crap while using the BFH mod always works for me
trusconi
10-12-09, 06:21 PM
i have the control arm torsion bar and torsion bar key as one whole peace. i cant get the pieces apart i massacred the cross member to get it out like i did but it was free it came from the same blazer my seats, visors, front bumper, and engine came from. it was a good blazer except the frame was somehow broken at a factory weld mid way the weld looked like a sponge it was so porous.
neo71665
10-12-09, 06:33 PM
it was a good blazer except the frame was somehow broken at a factory weld mid way the weld looked like a sponge it was so porous.


Surprisingly and kinda worrying but pretty common problem.
4runnerchevy
10-12-09, 07:59 PM
Its funny an s-10 site with everyone modifying suspension and no one has one. No its not worth going to Maine and pick one up. Thanks anyway!
neo71665
10-12-09, 10:13 PM
Its funny an s-10 site with everyone modifying suspension and no one has one. No its not worth going to Maine and pick one up. Thanks anyway!



Well if you notice 1st off the 2wd outnumber us 4x4 guys a good bit, 2nd off the 2nd gen guys outnumber us 1st gens a good bit. You have 2 things working against ya right there. Also control arms are kinda something that people don't stockpile in spare parts. You might try over on s10extremest.org, there are a few guys over there that are hardcore 4x4 and have swapped out to SFAs and might have old parts laying around. The only person I can think of on here that might have that kinda parts is Tink if she didn't haul the frame of her baja off when she done the frame swap.
TreasonAgainstCaesar
10-13-09, 12:36 AM
Stupid me. I didn't even think about someone doing a SFA swap. Midwestern4x4 (http://www.s10planet.com/forum/member.php?u=7801) is the only somewhat current member I can think of doing that. You could try to email or PM him.

I put different upper control arms on my blazer (not what you need anyway) but since I live in an apt and don't have lots of storage, I just donated the old ones to someone collecting scrap. But even the 6" lift kits just reuse the factory LCA.

I'm not ragging on your request. Just giving an opinion as to why there aren't too many around.
4runnerchevy
10-13-09, 08:47 AM
Thanks for the replies guys, I'll try the 4x4 guys on some other sites.
87wildside
10-13-09, 08:54 AM
Try Rock auto. They have stock replacement for cheap and there shipping is low. They also have 5% discount codes.


Discount Code: BF4766364F52

Please enter this code in the ‘How Did You Hear about Us’ box to receive discount.

Expires: 11/27/2009
Or....


Discount Code: 9AD7F05FB227

Please enter this code in the ‘How Did You Hear about Us’ box to receive discount.

Expires: 11/28/2009
4runnerchevy
10-13-09, 02:55 PM
Try Rock auto. They have stock replacement for cheap and there shipping is low. They also have 5% discount codes.


Or....

Thanks, I ordered one so everyone can stop looking. :eek:
Jongo88
10-13-09, 03:13 PM
We are here to help....
onebadbowtie
10-13-09, 06:17 PM
just seen this post i have the whole front suspension from an 89 s10 blazer 4x4 that i did a dana 44 sfa on.. if u need anything else give me a hollar.... sorry i couldnt help sooner
neo71665
10-13-09, 06:18 PM
Got the t-bars?
onebadbowtie
10-13-09, 06:24 PM
i have everything just taking up room
neo71665
10-13-09, 06:28 PM
How many miles were on them, 4 door or 2 door, how much?
onebadbowtie
10-13-09, 06:33 PM
just over 200,000 miles... its was a 2 door s10 blazer... idk what ever shipping is plus $20... i would have to find out how much shipping would be if ur interested.
neo71665
10-13-09, 06:35 PM
I might be, really wanting stiffer ZR2 bars but mine are sagging so bad plus I'm about to slap a 100+ front bumper on it.