PitchBlackBlzr
11-07-04, 08:06 PM
For all of you who are doing any kind of mod from stereo's to replacment gauge faces for a 98' to 04' Blazer the dash screw sizes are as follows.
All panel sizes are a 7mm head.
The light control box is a 5mm head.
For almost 90% of all screws in this area you will need and it is advised to use so as to avoid a headache at least a 5 or 6 inch extension for your ratchet.
Hope this helps.
All panel sizes are a 7mm head.
The light control box is a 5mm head.
For almost 90% of all screws in this area you will need and it is advised to use so as to avoid a headache at least a 5 or 6 inch extension for your ratchet.
Hope this helps.