I need wiring help for electric seats

[importmaster1300]

I know the big orange wire is Ign and the big black wire is ground. I picked up these very nice seats out of our local junkyard. They are just power (no heat) and I need to know what these other wires go to. I have manual seats now. Here is the pics:

Drivers side harness:

http://www.sicgmtrucks.com/forum/attachment.php?attachmentid=1062

http://www.sicgmtrucks.com/forum/attachment.php?attachmentid=1061&stc=1

Pass:
http://www.sicgmtrucks.com/forum/attachment.php?attachmentid=1060&stc=1

The seats:
http://www.sicgmtrucks.com/forum/attachment.php?attachmentid=1063&stc=1

[stepside2k1s10]

My first question would be what are the seats out of, and will the harnesses fit? I would figure there would be an adapter harness you can attach to go to the fuse box if the harness can't plug directly into it. I'm not too familiar with power seats, but my guess is that if it isn't out of an s-10 then you are going to have to get some type of universal adapter harness for it.

[importmaster1300]

they are out of a 00 Blazer

[T Man]

wanna sell your old ones when these get in?

[importmaster1300]

I sho' do wanna sell em'!

Shoot me a price.
They are in really good cond. I have one small cig. burn on the drivers seat. And that damn lever that lean's em back is broke on both, but you can recline them w/ vicegrips. LMAO!

[importmaster1300]

Oh I got the seats in and they were pretty much a 2 wire install.

[Maximus]

I thought the other wires would be for the different position switches.To put power to each switch.