PDA

View Full Version : 10" wide


1sikdyme
04-02-10, 09:38 AM
trying to figure out what backspacing i need to run a 10' wide rear tire on my xtreme. i haven't bought the wheels yet but i'm looking at weld racing alumna star 2.0 wheels. just need a goot idea for backspacing.
em98ss
04-02-10, 10:25 AM
I'm not sure but I think it also depends on the backspacing of the wheel, I,m running the C4 ZR1 Corvette/Camaro SS wheel, and I have the 2.5 spacer, which is a 17x9.5.

There are guys on here that run a 3" spacer, they will probably have better info than what I can give you, but at least, it may give you an idea.
1983BOWTIEBEATER
05-02-10, 10:16 PM
4" back space will set you up nicely.
firefighter
05-03-10, 12:33 PM
There is a chart some where. IF I remember correctly it is 5.5" for a 10" wheel..... I have since added a 1/2" spacer on my wheels.
firefighter
05-03-10, 12:39 PM
It also depends on rim diameter..... look here.....

http://www.s-seriesforum.com/forum/showthread.php?t=44214

I'm running an 18x10 and used the charts reccomended BS but added a .5" spacer and it is just perfect. It fit fine before the spacers but with the Xtreme kit on the Blazer it was a little too tucked. Hence the .5" spacers. Looks and fits fine now.