s10cyncrvr
11-09-04, 04:55 PM
If the administrators think this information is worthy of a sticky, please make it one.
This list contains everything you need to convert your 2wd S-10 over to the ZQ8 Package. This information came from Truckin Magazine (1996) although I have reorganized and added a few comments that I have learned. All these parts can be found on... www.gmpartsdirect.com or at your local dealership. If the part# is not current (which occurs for some parts) they can crossreference to the correct part#.
Items in bold are major parts
Items in italics are hardware
15989688 --- Frame Brace(1) - Located behind cab, ties the #1 box mounts together similiar to a crossmember, removing the bed is the easiest install method.
11515216 --- Frame Brace Bolts(4) - Used to bolt in the frame brace
15998553 --- Power Hop Shock(1) - A very stiff shock that bolts from the framerail to the rearend on the passenger side, used to reduce wheelhop
15996718 --- Frame Bracket(1) - Used to mount the power hop shock to the frame
11508252 --- Bolt(4) - Used for the frame bracket
15672911 --- Nut(4) - Used for the frame bracket
15650963 --- Washer(4) - Used for the frame bracket
15672933 --- Nut(1) - Used to bolt the power hop shock to the frame bracket
15981396 --- Washer(1) - Used to bolt the power hop shock to the frame bracket
15988458 --- Bolt(1) - Used to mount power hop shock to axle bracket
15672913 --- Nut(1) - Used to mount power hop shock to axle bracket
15997356 --- Axle Tube Bracket(1) - Used to mount power hop shock to the rear axle, can be welded on
15697709 --- Clamp(1) - Used to mount axle tube bracket to axle
15697705 --- U-Bolt(1) - Used to mount axle tube bracket to axle
11508101 --- U-Bolt nut(2) - Used to mount axle tube bracket to axle
15996061 --- Muffler/Tailpipe assembly(1) has shorter muffler to accomodate power hop shock; for regular cab, short bed model; *I have a 02 reg. cab, short bed and my stock muffler and tailpipe fit good*
15654771 --- Front Coil Spring(2) - for V6 trucks
or
15654770 --- Front Coil Spring(2) - for I4 trucks
22124808 --- Front Shock Absorber(2)
15989674 --- Front Jounce Bumpers(2)
12383463 --- Lower Control Arm(1) - Left, from 2wd Blazer with larger steer stops
12383464 --- Lower Control Arm(1) - Right, from 2wd Blazer with larger steer stops
15981886 --- Front Stabilizer Bar(1) - from 2wd Blazer, 33mm diameter
15981887 --- Front Stabilizer Bar Insulator(2)
15996780 --- Rear Leaf Spring(2)
22124809 --- Rear Shock Absorber(2)
15989675 --- Rear Jounce Bumper(2)
15957475 --- Rear Stabilizer Bar(1) - From four-door blazer; 23mm diameter
15697706 --- Rear Stabilizer Bar Insulator(2)
15697708 --- Clamp(2) - for the insulators
15697709 --- Clamp(2) - conforms to the rear axle tube
15697705 --- U-Bolt(2) - for the above mentioned clamp
11508101 --- U-Bolt Nut(4) - for the above mentioned U-bolt
15989671 --- Rear Stabilizer Bar Link Upper Mount Brackets(1) - left
15989672 --- Rear Stabilizer Bar Link Upper Mount Brackets(1) - right
11515358 --- Bolts(6) - Used to attach above brackets to rear shock upper mount brackets
15989670 --- Rear Stabilizer End Links(2) - Unique to ZQ8; not from Blazer
11508696 --- Bolt(4) - for attaching end links to bar and mounting brackets
11503643 --- Nut(4) - for attaching end links to bar and mounting brackets
26040591 --- Steering Box(1) - 12.7:1 ratio
12361588 --- Wheel(4) - similiar to 3rd gen. Z28, but with different offset
15988451 --- Hub Cap(4) - with red GMC lettering
or
15725033 --- Hub Cap(4) - with gold bowtie
or
15988450 --- Hub Cap(4) - with red bowtie
N/A --- Goodyear Eagle GA Tires(4) - P235/55/R16
This is not a end-all, be-all list but it is one of the most comprehensive ones I have seen. If you have a correction please post it.
This list contains everything you need to convert your 2wd S-10 over to the ZQ8 Package. This information came from Truckin Magazine (1996) although I have reorganized and added a few comments that I have learned. All these parts can be found on... www.gmpartsdirect.com or at your local dealership. If the part# is not current (which occurs for some parts) they can crossreference to the correct part#.
Items in bold are major parts
Items in italics are hardware
15989688 --- Frame Brace(1) - Located behind cab, ties the #1 box mounts together similiar to a crossmember, removing the bed is the easiest install method.
11515216 --- Frame Brace Bolts(4) - Used to bolt in the frame brace
15998553 --- Power Hop Shock(1) - A very stiff shock that bolts from the framerail to the rearend on the passenger side, used to reduce wheelhop
15996718 --- Frame Bracket(1) - Used to mount the power hop shock to the frame
11508252 --- Bolt(4) - Used for the frame bracket
15672911 --- Nut(4) - Used for the frame bracket
15650963 --- Washer(4) - Used for the frame bracket
15672933 --- Nut(1) - Used to bolt the power hop shock to the frame bracket
15981396 --- Washer(1) - Used to bolt the power hop shock to the frame bracket
15988458 --- Bolt(1) - Used to mount power hop shock to axle bracket
15672913 --- Nut(1) - Used to mount power hop shock to axle bracket
15997356 --- Axle Tube Bracket(1) - Used to mount power hop shock to the rear axle, can be welded on
15697709 --- Clamp(1) - Used to mount axle tube bracket to axle
15697705 --- U-Bolt(1) - Used to mount axle tube bracket to axle
11508101 --- U-Bolt nut(2) - Used to mount axle tube bracket to axle
15996061 --- Muffler/Tailpipe assembly(1) has shorter muffler to accomodate power hop shock; for regular cab, short bed model; *I have a 02 reg. cab, short bed and my stock muffler and tailpipe fit good*
15654771 --- Front Coil Spring(2) - for V6 trucks
or
15654770 --- Front Coil Spring(2) - for I4 trucks
22124808 --- Front Shock Absorber(2)
15989674 --- Front Jounce Bumpers(2)
12383463 --- Lower Control Arm(1) - Left, from 2wd Blazer with larger steer stops
12383464 --- Lower Control Arm(1) - Right, from 2wd Blazer with larger steer stops
15981886 --- Front Stabilizer Bar(1) - from 2wd Blazer, 33mm diameter
15981887 --- Front Stabilizer Bar Insulator(2)
15996780 --- Rear Leaf Spring(2)
22124809 --- Rear Shock Absorber(2)
15989675 --- Rear Jounce Bumper(2)
15957475 --- Rear Stabilizer Bar(1) - From four-door blazer; 23mm diameter
15697706 --- Rear Stabilizer Bar Insulator(2)
15697708 --- Clamp(2) - for the insulators
15697709 --- Clamp(2) - conforms to the rear axle tube
15697705 --- U-Bolt(2) - for the above mentioned clamp
11508101 --- U-Bolt Nut(4) - for the above mentioned U-bolt
15989671 --- Rear Stabilizer Bar Link Upper Mount Brackets(1) - left
15989672 --- Rear Stabilizer Bar Link Upper Mount Brackets(1) - right
11515358 --- Bolts(6) - Used to attach above brackets to rear shock upper mount brackets
15989670 --- Rear Stabilizer End Links(2) - Unique to ZQ8; not from Blazer
11508696 --- Bolt(4) - for attaching end links to bar and mounting brackets
11503643 --- Nut(4) - for attaching end links to bar and mounting brackets
26040591 --- Steering Box(1) - 12.7:1 ratio
12361588 --- Wheel(4) - similiar to 3rd gen. Z28, but with different offset
15988451 --- Hub Cap(4) - with red GMC lettering
or
15725033 --- Hub Cap(4) - with gold bowtie
or
15988450 --- Hub Cap(4) - with red bowtie
N/A --- Goodyear Eagle GA Tires(4) - P235/55/R16
This is not a end-all, be-all list but it is one of the most comprehensive ones I have seen. If you have a correction please post it.