3/3 lower

[chevy_1992]

is a 3 inch front and back a good lowering hight for a show/drag truck

[XxInFaxX]

i'd go 4/5 if your showing it

[chevy_1992]

its not gonna be a show show truck like just once a year at our local car show. its gonna be maily a drag truck and i think i am gonna go with a 3/3

[blazen]

i'd go with a 6/7 but if its your everyday driver than maybe a 4/5. 3/3 is ok if your not really into being lowered but yet still want it to look good and if your gonna be draging it than make sure you get a good set of shocks.................go low

[XxInFaxX]

i still say 4/5. this way its not layin frame, but its nice and low.

[importmaster1300]

The one in my pic is 3/3 w/ p205/75/R15's
My cousin is 3/3 and he has p205/60/r15's and he sits at least 2in lower than me.

[ZR1-S10]

I'd go with eather a 2/3 or 3/4. Having 1" more drop in the rear will even the truck out and help with weight transfer.

[lowriderbowtie]

4/5 or even 4/6 is good for everyday driving...ive had both, no probs scraping and what not with 4/5, but 4/6 gets me hung up on alot.

even a 3/4 is good...hell any drop looks good on an s series!

[chevy_1992]

i am just gonna go with the 3/3

[importmaster1300]

Hey you are in Clinton?
If you need ANY help I am in Springfield.
Remember if it ain't low enough you can get lower profile tires!

[chevy_1992]

Hey you are in Clinton?

If you need ANY help I am in Springfield.
Remember if it ain't low enough you can get lower profile tires!

i dont want low profile tires. and yes i live in clinton.

[T Man]

guys, i think he means like a quarter mile drag,not scrapin the ground. I would go with the 3/3 if you want. I am going with a 1/2. My new V8 will drop the front about an inch, and I bought some 2" drop blocks yesterday.

[chevysdime98]

alls i know is stay away from 5/6 especially if you have a airdam. i now have 1.75" ground clearence in the front...**** looks nice but it aint really drivable up here in NE...but hey the tracks flat as long as u can get there ur all good

[StaticDime96]

i started with a 3/4 looked ok but iwanted to go lower and now im at 5/5 and amloving it

[LilYellowZQ8]

I have a 4/4 drop on my 03' (ZQ8 W/2in belltech spindles/blocks) with 245/45/zr16 Proxes T1-S's. The lower you go, the more you will have to worry about clearance issues. I need to get a new y-pipe made because I kinda crunched mine on a steep speed bump.

[chevy_1992]

recieved my 3/3 kit today. its nice

[lowriderbowtie]

right on man
get it all put in, take pics and show us!!

[StaticDime96]

yeha lets see some pics

[extreme gmc]

sorry, but i just gotta
:fcad0cab:

[chevy_1992]

got the rear end dont because i havent had time to do the front with school then work durring the week then working doubles on weekends. i work 7 days a week. but i think my dad is gonna work on the front for me while im at work

Before:
http://www.sicgmtrucks.com/forum/attachment.php?attachmentid=1216&stc=1

After:
http://www.sicgmtrucks.com/forum/attachment.php?attachmentid=1217&stc=1

[lowriderbowtie]

Looks awesome man
i wrote up an awesome 'how to' for installing coil springs, but for some reason it hasnt been put up yet.

stay low

[StaticDime96]

they arent very hard i used a spring decompressor