Wynjammer should ship around tuesday:)

[Waynestowels]

I spoke to Al and he said they should be shipping out early next week, around tuesday.

[Waynestowels]

Al shipped my SC today!!!

[flatblack]

me too!!!

[JROD©™®]

damn so many s/c dimes...i feel left out... :-(

[chevysdime98]

ugh im like the only 2.2 so ill prolly be the last one...son of gun

[LoRyder]

Just got an e-mail form Al, that mine is also on the way! Allllllllllll Riiiiiiiiiiiiiiight!

[xtreme canuck]

Hey Guys ,
A Few Things To Watch Out For... One Of The Main Bolts To Mount The Charger Was Too Long And I Almost Twisted The Darn Thing Off. I Had To Shorten It A Little Bit. Also The Belt Al Recommended Was A 5061080 (k0601080) But Mine Needed A 1/2 Inch Shorter To Work Properly. This May Help You More Than The Others Gerard Because They Say There Is A Little Difference In The U.s. And Canadian Trucks Even Though I Didn't Think There Should Be. Also Check And Double Check Where You Cut Your Rad Hose. The Cut Is Basically Right Above Where Your Charger Sits .(so Maybe Cut It Last.
As Far As The Charger Goes I Am Quite Happy. I Have Gotten A Ton Of Compliments On The Sound And The Pull Is Hard. I Am Having A Hesitation Problem At About 4700 Rpm But I Don't Think It Is S/c Related. I Can Hit 180km/h Easily! And Not Sure How Much Faster On Top End But This Little Baby Rocks. There Is Nothing More Satisfying When Some Body Is Expecting You To Shut Out At 100mph And You Are Just Warming Up !
Hope You Have Good Luck
Later
Craig

[94s10]

well Al told me he ordered new better looking intake bonnets for the TBI kits from volant on friday. last e-mail i got from him was monday and he said that they should arrive that day and would ship as soon as they got to him. he hasnt e-mailed me back yet, hopefully he has shipped it. did he give everyone else tracking numbers?

[D-Caf]

He gave me a tracking number (currently somewhere between Phoenix, AZ and Maryland) and it's scheduled for delivery on next Monday. When I talked to him Monday this week he said he was going to be working on shipping them out all week, he's making sure they are packed good so that nothing gets scratched or broken. Also said he was swamped with orders, but working hard to get them all out as quick as possible.

[Supercharged-ZQ8]

"I can see you quiver with antici. . . Pation!"

Does anyone recognize that quote?

But, I digress. . . The wait is worth it. My local Firestone keeps *****ing about my tire wear. . . I had a buddy of mine there do an alignment on it (it needed it after all that suspension work) -- I told him that when he "test drove" it to give it a little. He came back, handed me the keys and said "I've driven a lot of cars and trucks before -- but THAT scared me!" Apparently it got a little sideways on him. . .

[flatblack]

Hey Guys ,
A Few Things To Watch Out For... One Of The Main Bolts To Mount The Charger Was Too Long And I Almost Twisted The Darn Thing Off. I Had To Shorten It A Little Bit. Also The Belt Al Recommended Was A 5061080 (k0601080) But Mine Needed A 1/2 Inch Shorter To Work Properly. This May Help You More Than The Others Gerard Because They Say There Is A Little Difference In The U.s. And Canadian Trucks Even Though I Didn't Think There Should Be. Also Check And Double Check Where You Cut Your Rad Hose. The Cut Is Basically Right Above Where Your Charger Sits .(so Maybe Cut It Last.
As Far As The Charger Goes I Am Quite Happy. I Have Gotten A Ton Of Compliments On The Sound And The Pull Is Hard. I Am Having A Hesitation Problem At About 4700 Rpm But I Don't Think It Is S/c Related. I Can Hit 180km/h Easily! And Not Sure How Much Faster On Top End But This Little Baby Rocks. There Is Nothing More Satisfying When Some Body Is Expecting You To Shut Out At 100mph And You Are Just Warming Up !
Hope You Have Good Luck
Later
Craig


Whats this about cutting the radiator hose?? S/C-ZQ8, did you have any problems with what this fine scholar(no pun intended) is talking about?? :confused:

[xtreme canuck]

Whats this about cutting the radiator hose?? S/C-ZQ8, did you have any problems with what this fine scholar(no pun intended) is talking about?? :confused:
the reason i had a few problems is because my instruction manual was missing quit a bit of info , al's computer wasn't working properly.
but i guess you already know everything

[chevysdime98]

err i want mine NOW...i really wish my email would start flashin

[flatblack]

the reason i had a few problems is because my instruction manual was missing quit a bit of info , al's computer wasn't working properly.
but i guess you already know everything

I wouldnt be asking if i already knew...i am getting a wynjammer also and i was just curious if S/C zq8 had the same problems you had.....

[D-Caf]

I believe everyone must cut their radiator hose. Al provides an extension which you put into it to make it fit around the S/C head. This was part of the normal install. Don't know about the other issues he had in his post though.

Also, when I talked to Al Monday, one thing that has been delaying him shipping the S/Cs out is that he lost all his instructions books for the installs. Apparently he's had like 6 HDs fail on him recently. Anyways, he had to recreate the install sheets. I think the first few pages of the install are actually on his website if you want to get a heads up on the first part of the install.

[joker2040]

Someone should do a very detailed write up on here about the install.

[slowzq8]

Hey guys I would love to see some 1/4 mile times of trucks with a wynjammer. Somebody please go to the track. I am begging. I have seen so many people with them, but no track numbers. Now that it is spring time, somebody must want to go beat on their truck a little.

[chevysdime98]

give me two weeks as long as the s/c gets shipped soon ill be up there....gotta love breakin the law n runnin with no license(its ok im gonna trailer the truck there, just gonna pretend i have a license when i get to the track but shhhhh)

[94s10]

i'll have some track times with the TBI kit by the end of summer. hopefully with a CPI cam in it as well

[LoRyder]

...Also The Belt Al Recommended Was A 5061080 (k0601080) But Mine Needed A 1/2 Inch Shorter To Work Properly. This May Help You More Than The Others Gerard Because They Say There Is A Little Difference In The U.s. And Canadian Trucks Even Though I Didn't Think There Should Be...
Craig

Thanks man, I'll be watching for it. Do you have a number for the belt that you ended up running?

[xtreme canuck]

the belt i ended up with was a 5061075 (k061075) . the belt i was told to use was just a little too long and slipped within 15 minutes. al may have made changes to the kit but i just thought i would give you a heads up. just check your tension on the original before you install your s/c and then re-check on the new belt after...if it has the same tension then you will be fine.
let me know how you make out

[tunerpike]

Has anyone talked to Al about our superchargers?

[94s10]

you mean the TBI kits? yeah he ordered different intake bonnets from volant, he got them monday april 25th but they sent him the wrong ones. they sent him new ones and he said he should have them by monday the 2nd and we ship either monday or tuesday. they should be on the way right now but i havent heard anything from Al, maybe i'll drop him an e-mail

[94s10]

well Al already responded, the bonnets just arrived a few hours ago. he will be shipping friday or monday

[tunerpike]

Thanks for the input 94s10. If you are interested, or any body else, I have a cam for sale. The cam is new in the box wraped in plastic. It is the same cam I have. Comp cam .510 lift exh. .500 intake and 270 duration. I think that is the right measurements. If anyone is interested let me know, and I will post pics.

[Sparky2263]

Thanks for the input 94s10. If you are interested, or any body else, I have a cam for sale. The cam is new in the box wraped in plastic. It is the same cam I have. Comp cam .510 lift exh. .500 intake and 270 duration. I think that is the right measurements. If anyone is interested let me know, and I will post pics.

Balance shaft or non-balance shaft?

[tunerpike]

Balance shaft.

[tunerpike]

Supercharger on the way!!!!!!!

[Sparky2263]

Camshaft on the way? ;)

[tunerpike]

Cam will ship tomorrow. I will pm you the tracking # when I get off work.

[Sparky2263]

WoooHooooo!!! Blazer gonna be thumping soon!

[94s10]

hey did he send you an e-mail? when did he send it? i havent gotten mine yet :(

[tunerpike]

He sent my email yesterday with my tracking #'s. He said I should recieve it by Thursday.

[Sparky2263]

Tunerpike, where are my tracking numbers? Or return pm's?

Werd......