PDA

View Full Version : starting problems



chesspirate
05-07-05, 03:33 PM
Hey guys. When I turn the ignition i get a fffzzzzzzzz noise sometimes without the engine engaging. I figured the starter is just off a bit, but wanted to see what you guys thought. Can I just get under the truck and put it in place or whats going on???

1993blazerlt
05-07-05, 03:37 PM
is you started turning at all of is it just the solenoid clicking. If the solenoid is just clicking either you have a bad connection or your battery is low

Hammer
05-07-05, 03:39 PM
or the starter is not shimmed right and it is binding against the flywheel. if you don't have it in there correctly, sometimes they take a shim, my 84 took a shim in it otherwise it would bind and smoke the starter.

you could have a good starter and a bad solenoid also or visa-versa.

Sparky2263
05-07-05, 06:49 PM
I think you're describing a starter drive on it's way out. Sound like the motor is spinning fast but not engaging anything? That's the starter drive.

chesspirate
05-08-05, 01:18 AM
yeah, its a fast higher pitch noise than the engine spinning. I'm pretty sure its the starter, so is there anything i can do to fix it? or am i looking at getting another starter?

Sparky2263
05-08-05, 01:26 AM
I'd find a local, reputable starter/alternator rebuilding outfit. Quality is usually greater because they supply local repair shops.