what you guys think?

[chevysdime98]

what do you guys think? think this would work?http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7974766948&category=33731

[chevysdime98]

if you guys could help me out that would be great thanx

[T Man]

Which rear end do you have? Throw up the RPO codes and someone will tell you if it will work. I believe you need the 8.5" rear end for that to be able to work, and even then I dont know if the spline countwill be right, depends on year.

[importmaster1300]

Go with a Zexel.

[T Man]

That is a Zexel isnt it?

[ZR1-S10]

Yes that's a Zexel. It will work with a 7.625" rear with 28 spilnes (wicth are the 88' and newer rears).

[chevysdime98]

so what your saying is buy it?

[ZR1-S10]

Do you know witch carrier you have? Most Zexels' are "series 3" for 3.23 and up gear sets. You can use 3.08 and lower but you would still need to change to the "series 3" type gears.

[chevysdime98]

ummm alls i need is my code out of the glove box to tell you that?

[chevysdime98]

ok so i have gt4 in the glove box, which is 3.73s....does that mean anything?

[ZR1-S10]

Then you should have a "series 3" carrier.

[ZR1 S10]

Buy it!

[chevysdime98]

to late now auctions over, but now i know

[T Man]

kinda got me curious. I have an 87 with 26 spine axles. If i got a zexel and a set of axles out of an 88 or newer rearend could I pull it off?

[ZR1-S10]

Sorry the auctions over but $120 was a little high for a take-off, SLP sold them at $99. SLP no long offers the take-offs but you can get the Heavy-duty ones for $400.

[chevysdime98]

is the heavy-duty one worth the 400?

[ZR1 S10]

is the heavy-duty one worth the 400?

Alot of people say it is, but I've never seen anyone with the unit. Seems everyone goes with an eaton or auburn when spending the big bucks.

[Sparky2263]

kinda got me curious. I have an 87 with 26 spine axles. If i got a zexel and a set of axles out of an 88 or newer rearend could I pull it off?

Yup. That's what I did to my 87.

[chevysdime98]

is the best place to find an lsd in a junk yard?....or should i be scannin the internet?

[chevysdime98]

oh and on top of all this i call my garage that i always go to n the guy tried tellin me im dumb for not doin a whole new rear end...i dont think he understands that its a 2.2l 4 cyl s10 even after the s/c i still wont have the power of a camaro...guys a tool box