EGR plates

[jdhogg]

just wondering if they were gonna be available


HAPPY TURKEY DAY

[Sparky2263]

They're really easy to make yourself. Here's how;

Buy 2 egr gaskets for your application. Take one and stencil out a pattern on a piece of 1/8" steel. The pintle hole can be drilled out normal size. The other hole, drill out to 1/8". That is the restriction to egr flow.

Remove the egr valve, clean all the gasket material from both surfaces and insert the plate between the valve and intake manifold. Obviously, use your 2 gaskets on both sides of the plate.

If it sets a code 32 (egr) after doing this, enlarge the hole 1/32" at a time 'til it stops setting the code.

For max improvement, block off the egr totally and get a custom chip made. That's what I did.