Family Guy Buddy Icons | Mortgages | Loans | Loans | Best Search Engine
'85 for parts [Archive] - S10PLANET.COM

PDA

View Full Version : '85 for parts


hobosalesman
02-01-06, 09:44 PM
Sorry if this isn't allowed, couldn't find a "for sale" section or any info on one here.

Both in running condition, automatics, 2.8L V6 carbureted. Both rusted out, hoods are fine though, doors fine if repainted properly. Good glass all around except for blazer windshield. Black/grey blazer interior (buckets + fold down bench), blue pickup interior (no seats). Pickup was sold to me as having a strong motor but slight frame damage at front left (pictured). I didn't drive it much but when I did it started well and drove well. Blazer is underpowered at high speeds, my guess is poor compression. You can hear either engine running as long as all the needed parts stay put, and I can do compression test as well. Blazer trans shifts high and hard when cold, takes 5-10 minutes to warm up and shift properly. Pickup trans is fine, I think both are 700R4. I can pull and ship parts or you can remove them and pick up in Dalmeny. I'll beat any price on parts you can find by 10%. I can deliver parts to Saskatoon area.

I have info and pics here:
http://142.165.246.187/forsale
http://142.165.246.187/forsale/s10

I can take pics by request and put them in the above directory. Don't respond here, instead email hobosalesman AT gmail DOT com

birdman409
02-26-07, 07:13 PM
Is the carburetor compatable with GMC S15 of the same year? I'm assuming since the engine is the same. If you still have them, I may be interested. If so, I'll see what else I may need.

Mikz86TA
02-27-07, 01:11 AM
Classifieds are in the top header.

Hammer Head
02-27-07, 01:13 AM
psst.. this is over a year old.