extreme wheels on 94 s10

[94 s dime]

well i put the wheels on my truck and for some reason they dont quite fit well, i had my truck on my lift and spun the front wheels and they wobbled?...so i put my stock wheels on they didnt wobble and i went and put the extreme wheels on the tire balancere and they didnt wobble? is there any fitment problems on older s10s with trying to fit extreme wheels?

[00S104.3]

Those wheels should fit fine. I saw xtremes on a first gen. S-10 which gave me the idea to get a set for my truck. I had no trouble at all.

[20Xtreme02]

I'm guessing that you didn't have them tourqued evenly. If all of the lugs were tight there shouldn't be any wobbling from those wheels on your truck unless they are bent.

[Sparky2263]

Ck. the center hole size and make sure it's the same. If it's binding there you should see the marks.

[nomaboy]

yea my cousin had that same problem with new style zq8 wheels on his 86 camaro. (i know it is a different car but same problem). the center hole was too small on the rims so they never would sit flush with the rotor. i thought they would be the same but apparently not.
o yea and whatever you do dont force them. you may be able to get them on like this but you will NEVER get them off.

[94 s dime]

yealp^ didnt want to come off but a BIG hammer was of some help, i think im gonna just sell the wheels and be done with them the wheels are not bent its the center hole thats too small and i used a torque wrech to tighten them down...

[nomaboy]

now if you could bore the hole out evenly then you could use them. wouldnt have to be much more than a 1/4 inch total. we were going to do that but then the car took a dump so...