vacuum diagram

[jpeter13]

i need to know if any one has a good vacuum diagram for a 1.9 eng it's in a 1985 s10 i just put in a head for a guy and he had the head off when i got there and now i have no idea where a the lines go any help would rock

[Sparky2263]

Here ya' go.

[jpeter13]

well that is not what I was looking for that is the emission hose routing what i need is the vacuum hoses coming out of the carb and intake manifold and where they all go

[Sparky2263]

Take a closer look. The carb is identified as well as the manifold and the lines going to it.

http://www.s10planet.com/forum/attachment.php?attachmentid=2412

[wrenchead3]

Sparks must have his Shopkey at home.Let me guess,you use Alldata.

[kidknicky]

I replaced the drivers side fender "after" getting the truck back with the damaged fender removed. The replacement fender has a damaged vacuum line coming out of a cannister from within the fender panel. I believe I have found the proper connection to this, a vacuum connector near the brake fluid reservoir. What does this do and is it required? The vacuum line is actually broken at the cannister and it should be replaced. I have secured it with hot melt glue as a temporary fix and things seem to run fine. The cannister seems to act like an m/t bottle so that back pressure can build up. But I noticed that my replacement hose (clear PVC) has collapsed as well...Thanx for any info on this !
Regards,
Kid