rear sway bar

[killerazonic]

Ok so i have a 99 S10 pick up 4x4 with way to much body roll. (I am used to a 97 Trans Am WS6)

Now my question is will a stock rear sway bar off a 2002 Extreme Blazer bolt up directly to my truck. Or am i going to be drilling into my frame and welding to my rear end?

[HenryJ]

You might check out this - GM Rear Sway Bar (http://www.s-10crewcab.com/og1/modinfo/swaybar/swaybar.htm)

That install is on a crew cab S-series.

[Hammer Head]

Blazers are different than trucks for the rear anti-roll bars. But yes an anti-roll bar from an Xtreme PICKUP would bolt right up there.

[00S104.3]

I have a ZQ8 (same as xtremes)rear sway bar that I got from ebay. It came with all the brackets and bushings. All of the holes needed were already on the frame/shock mounts. It is a great improvement. It is the same one posted in HenryJ's link. Took me about 20 minutes to install.

http://www.uploadfile.info/uploads/834602a868.jpg (http://www.uploadfile.info/)
http://www.uploadfile.info/uploads/2269e1465c.jpg (http://www.uploadfile.info/)
http://www.uploadfile.info/uploads/d86786e7ef.jpg (http://www.uploadfile.info/)