having wiring problems,,,,HELP!

[383blaze]

tryin to get the starter to hit off of ignition,,,,have old wires from 2.8,,,only 2 though 1 from terminal on firewall to large terminal on starter,,,have one wire coming from old harness to small terminal closest to the block,and batt cable on large terminal,,,,still wont hit off ignition,,can cross with screw driver and it works but no ignition

[Hammer Head]

Here's an article that will tell you everything I will about a starter relay.
http://www.carcare.org/Electrical/starter_relay.shtml

Here's another article about the starter solenoid.. these are all pretty elimentry.
http://www.carcare.org/Electrical/solenoid.shtml

Here's an article on how to wire in a ford solenoid, which may solve your problem.
http://www.novaresource.org/starter.htm
those little diagram may help you figure out how to wire it if that's a problem.

[383blaze]

got it already thx,,,shifter, driveshaft ,exhaust,havin problem with throttle cable,,,but ill work it out,,,all that i have left and she better run good,,or scrapyard it goes,,NOT