PDA

View Full Version : Droppin a 2000 Xtreme


Diesel_Cain2000
01-29-07, 01:10 AM
I was wondering if anyone knew what the lowest I could go with my dime without bagging it. I dont really wanna do all that at this time. If any of you has seen my truck and wheels then you know what I mean there is still a pretty good gap there. And I would like to tuck them somewhat. My buddie said another 2 is as low as I can get and that is with blocks for the rear and spindles in the front. Let me know what you guys think please.
<-~Jo~->
01-29-07, 08:24 PM
ive got 2 inch spindle plus 4 inch blocks plus air shocks

gives me compared to a normal s-10 7inch of drop to the rear and 4 in the front .. the front is too high it pisses me off .. im gonna air ride it aha ... id say buy these jdm 3½inch control arms plus the extreme coils it will give you 5½ drop with a 4inch block but with normal shocks

3½inch drop JDM control arms + 4 inch blocks in the rear that should give you a nice drop ! id like it



o yeah youll have to remove the factory bumpstop
droopy89
01-29-07, 08:55 PM
id say 2 inch spindles, maybe with 1 inch coils, and 3 inch leaf springs
<-~Jo~->
01-29-07, 10:15 PM
he own an extreme so they already have 2inch drop coils and 2 inch drop leafs


so you are dropping it only 1 inch more .. still missing at least an inch to eliminate wheelgap
Diesel_Cain2000
01-31-07, 07:38 PM
No I wanna drop it at least 2 more inches in both the front and rear to get rid of the wheel gap. I just dont wanna bag it yet. I know the rear will be hard to do because its a stepside and I dont get the same clearance on the rear wheel wells. I just wanna get as low as I can without baggin.
baggedandcaddied
01-31-07, 08:55 PM
a friend of mine had his lowered 7/8, won lowest static at sseries 2 years in a row
<-~Jo~->
02-04-07, 11:05 AM
No I wanna drop it at least 2 more inches in both the front and rear to get rid of the wheel gap. I just dont wanna bag it yet. I know the rear will be hard to do because its a stepside and I dont get the same clearance on the rear wheel wells. I just wanna get as low as I can without baggin.



just go with some 2inch spindles and some 2 inch blocks then