wanted supercharger

[99s10xtreme]

i want a supercharger for a 99 4.3L vortech vin code w let me kno if any one has one. im lookingto run ne ware between 10-12lbs of boost maybe?

im looking for lowest price possible im out of the metro detroit area the closer the better......
thanx

[rentedmule]

if you want 10-12psi you're going to be limited to a mach procharger kit or a used vortech.

[Dogsofjune]

if you want 10-12psi you're going to be limited to a ATI Procharger kit or a used vortech.
Fixed.
Mach Performance seems to have developed a rough reputation. Seems I was lucky that they never even answered the phones when I tried to order stuff.
Plus, they didn't make the superchargers, just fabbed a kit to adapt it to the 4.3. Which many other places throughout the country can do as well. Check with local speed shops that are dealers for ATI's stuff.

You are correct about the Procharger and the Vortech units are capable of 10-12#'s, or more. The Wynjammer is capable as well, but not likely to happen with the belt driven Powerdynes. Some are lucky to run 9#'s reliably.You can get that out of the gear driven Powerdynes XB-1A. If I remember right it'll run up to 18psi and needs to have the oil pan tapped.

[rentedmule]

lol, thanks dogs, sorry for the poor wording. there's a powerdyne on ebay right now but i'd ditch the 12 psi pulley ASAP.
http://cgi.ebay.com/ebaymotors/powerdyne-supercharger-s10-vortec-4-3_W0QQcmdZViewItemQQcategoryZ33741QQihZ014QQitemZ3 30127502646QQrdZ1QQsspagenameZWDVW

[HURRICANE700]

IM SELLING MY POWERDYNE BUT IT WONT RUN 12 POUNDS. IM SELLING EVERYTHING TO DO A INSTALL. LET ME KNOW IF YOUR INTERESTED