Console Shifter Harness and U-Clip

[Mikz86TA]

I have up for grabs a 2nd Gen automatic floor shifter console wiring harness and the shifer U-Clip. The harness is complete with the plug under the dash (also has a pigtail from the donor if wiring is needed to be spliced), the shift indicator bulb/socket/plug, the shifter plug itself and the tow-haul button if needed.SOLD IT !!! I also have a couple of the U-clips that attach the console shifter handle to the shifter assembly. Free upon request with harness purchase or $2.00 shipped without. Let me know if you need a picture. Picture of actual item is below in seperate post =)

[T Man]

open to any trades?

[Mikz86TA]

What you got?

[T Man]

whaddya need?

[Mikz86TA]

Hehehehe.......Ignition Box, Custom PCM Tune, StepShavers, Cal-Tracs, 3.42s 8.5 diff, SLP 1.6 rockers, mostly high dollar crap at the moment. Actually I dont NEED any of it, but its a desease I cant kick! hahaha

[T Man]

ive got axle shafts from a 4wd...ha ha

bout anything 1st gen...

[Mikz86TA]

I dont need any 1st gen parts. Both my projects are at that stage where its all the expensive crap I put off. The TA is a few suspension, the Moser 12-bolt, rebuild the 700R4 for the milionth time and black seatbelts (since dk.carmine are impossible to find in decent shape if at all. The truck is pretty much whats above. I want to get the headers on, get a MSD 6A or Crane HI6 with the MSD quick plug and contemplating the custom tune. Im learning about the Tq Management these past few days more than I ever did B4. Not that I have the real-time data on the JET, I can see the crazy timing tricks the PCM is doing.

[T Man]

How bout a JL 10w0

[Mikz86TA]

We might be able to do something with that. What are we talking here? Condition and pic?

[Mikz86TA]

Lets see if I can get a reference picture up.....

[T Man]

I dont really need a wiring harness, I was just wanting someting better than the b&m shifter cover that is in there. Its just a good 10w0. I thought it was blown, so I painted the cone, found out the tinsel wire came off, so I soddered it (i think, maybe used a female connector) and voila! had a good sub again. The typical bubble in the middle of the jl subs is also smushed in. Maybe for the console, and the glove box light id part with the good one.....

[T Man]

awwwww ****. IM sorry mike, i read it the first 2 times and didnt read wiring harness. Sorry man, thought you had the console. nevermind

[Mikz86TA]

Hahaha..Its cool. I was like WTH is Tommy on crack? Yeah, its just the harness and the shifters handle clip. The console was junked!

[Mikz86TA]

SOLD!!!!!!! :D