4.3L Performance Parts for sale. [Archive]

HotRodV6

09-18-07, 08:04 PM

Ok, these parts are from a 96 S10 that is a local HASTE member that im building a 408 LQ9 to swap it in his truck along with a T56, i have a guy here local that is buying the stock V6 this weekend, and doesnt want these aftermarket parts, so im going to list them up here and give you guys first shot before they go on ebay.

Granatelli MAF, it is brand new in the box as he never got it installed, it has the cold air tuning also---black----asking 125 shipped

Poweraid TB spacer, incudes all the hardware to install it, again, not sure how long its been on the truck but looks to be in good shape-----asking 50 shipped

Also have a stock 96+ air box if anybody is interested, will give free if you pay the shipping.

Any questions just feel free to ask.

Dogsofjune

09-18-07, 08:32 PM

Seems like a decent deal on the headers. Shame they aren't ceramic coated.
I doubt the TB spacer would sell for that much here. Not very popular. Probably have better luck with that on Ebay.

Hows the LS1 Ebrake kits coming along?

Slacker1357

09-18-07, 08:36 PM

How is the Radiator? will it fit in a 2001? compatible?

Blazer69

09-18-07, 08:56 PM

would be interested in the hypertech......

Hammer Head

09-18-07, 09:01 PM

94 truck/95 blazer-up should all be the same rad. If replacing use one that cooled the same size engine. I also have a used rad I'm using for mock up as I also plan to do a 408 LSx but retain the auto & I feel it will cool the 408 just fine. Use an electric cooling fan w/ nice cfm #s... like a taurus fan

droopy89

09-18-07, 11:06 PM

will the headers and the MAF work on my 97?

TreasonAgainstCaesar

09-18-07, 11:51 PM

The JBA's come in different varieties for 2 or 4wd. Also some are for use with AIR injection and some are not.

Mikz86TA

09-19-07, 01:50 AM

X2..check where your air tubes are at.

87wildside

09-19-07, 01:54 AM

Slaymanic

09-19-07, 03:02 AM

I'm interested if the headers fit 2wd 2000

Mikz86TA

09-19-07, 12:47 PM

They should fit is it has the 3 bolt flange. If yours is non AIR injection and those are, just plug it. My Gibsons are AIR and my truck isnt

HotRodV6

09-19-07, 01:03 PM

OK, the headers will fit any 96+ if you DO NOT HAVE AIR INJECTION, if you do they will still work, but just dont have the hookups, and yes they have a 3 bolt flange for the factory y-pipe to bolt up.

The MAF will work on all 96+

HotRodV6

09-19-07, 01:11 PM

I sent PM's to those that expressed interest.

And the Ebrake kits are just about finished, just have to get the axle brackets back from the powdercoater.

TreasonAgainstCaesar

09-19-07, 01:13 PM

Mikz, did you get your Gibson headers on yet?

Mikz86TA

09-19-07, 01:42 PM

=( No. Still waiting on time or funds. Got Funds?

1meanextreme

09-19-07, 02:43 PM

I am interested in the MAF....will it fit a 2000 x?

HotRodV6

09-19-07, 06:41 PM

I am interested in the MAF....will it fit a 2000 x?

yes it will fit no problem.

00S104.3

09-20-07, 04:46 AM

HotRodV6 can you get me pics of the headers? Bowtiestyle79@cox.net or pm me here. Thanks

HotRodV6

09-20-07, 10:45 AM

well i have one guy that said he wanted the headers and MAF first, so im gonna give him first shot, will know for sure in a day or two.

I can get more pics of them once i get the engine yanked out this weekend, you can see much with them in the truck.

00S104.3

09-20-07, 05:55 PM

Slaymanic

09-21-07, 02:07 AM

Don't forget about me I was second :P

HotRodV6

09-22-07, 02:10 AM

OK, im gonna start on getting the engine pulled out this weekend, the guy is coming monday to pick it up, and i will have pics of the headers for those interested posted up by sunday at the latest, just depends on if i get called into work at all.

droopy89

09-22-07, 02:24 AM

yea, pics of those headers would be really nice

HotRodV6

09-23-07, 01:07 PM

yea, pics of those headers would be really nice

Ok, i will do that.

I was at work all day yesterday and didnt get a chance to work on getting the engine out, but im heading outside to start on it here in a few, and will have pics for you later today.

droopy89

09-23-07, 04:42 PM

very good

HotRodV6

09-24-07, 02:54 PM

OK, i got the engine and trans yanked out yesterday, and took a couple pics of the headers, i pmed them to one guy, but figured id go ahead and post them up here for anybody else incase the first buyer backs out.

http://www.h-a-s-t-e.com/albums/96-S10-Ext-Cab-408-LQ9-w-T56-Swap-Project/P1010373.sized.jpg

http://www.h-a-s-t-e.com/albums/96-S10-Ext-Cab-408-LQ9-w-T56-Swap-Project/P1010374.sized.jpg

Hammer Head

09-24-07, 03:07 PM

I'd give you $75 shipped for those headers seein as they're all rusty & that's exactly what I could find on Ebay for that price.

boxcarracer963

09-24-07, 03:20 PM

is the stock airbox the same as 98 do you know? i need one for going mudding i dont wanna go with my cold air and i lost my stock one.

Hammer Head

09-24-07, 03:21 PM

I have a modified OEM airbox for the '98-up. Pulls more air. Check my stuff off..

HotRodV6

09-24-07, 05:43 PM

is the stock airbox the same as 98 do you know? i need one for going mudding i dont wanna go with my cold air and i lost my stock one.

yes all the 96+ airboxes are the same, i have the stock one for this truck if your interested, let it go pretty cheap.

I'd give you $75 shipped for those headers seein as they're all rusty & that's exactly what I could find on Ebay for that price.

Ill have to say No deal on that one, you and i both know they are worth more than that, just alittle surface rust wont hurt anything.

Thanks for the offer though.

00S104.3

09-24-07, 05:46 PM

Keep me posted if the others that were interested in the headers back out. Thanks

HotRodV6

09-24-07, 08:12 PM

no problem.

HotRodV6

10-05-07, 11:03 PM

OK, i took out the JBA headers, and Hypertech as they are gone, but added some gibson headers and a ported and gasket matched 96+ complete intake assembly.

HotRodV6

10-14-07, 10:45 PM

OK, updated again, i sold the stock 5 speed to a local for his 94 S10, seems his locked up.

Anyways i still have the parts for sale in the first post, and am neg on the prices, can get pics if needed as well.

baylorxdime

10-15-07, 04:56 PM

gibson header prices? wear? stuff like that? maybe reading owned me earlier in the post but im interested?

HotRodV6

10-25-07, 11:20 PM

Ok, well i had all the parts up on craigslist and have sold the ported lower intake and gibson headers.

I will update the first post.

brj833

11-26-07, 09:39 PM

do you still have the mass air flow sensor for sale and if so how much

HotRodV6

11-26-07, 11:50 PM

do you still have the mass air flow sensor for sale and if so how much

Yes i have the Mass Air by itself, and i have a complete volant cair air intake for 96+ with a granatelli maf installed, and it has a tube that replaces the factory accordian tube, only thing stock is the TB hat. I had it on my 2K bravada that got crashed.

Im asking 125 for the MAF and will sell the complete volant kit with a granatelli MAF for 250 and those are shipped prices.

87wildside

11-27-07, 09:54 AM

So how are those brake kits going, or did you refund those guys money? I noticed you stopped posting on SSF, why is that? Oh I forgot. The admins over there won't let you post until you send the kits or refunds. Have the Humble Police contacted you yet?

Dogsofjune

11-27-07, 10:18 AM

Damn son, so much for being subtle about it.
I had been following that over there too. Was curious how transactions here would go. Hoping that there wouldn't be any "questionable" dealings going on.

brj833

11-27-07, 12:01 PM

how much would shipping be to 06850 for just the maf and what kind of payment do you accept

87wildside

11-27-07, 01:45 PM

Damn son, so much for being subtle about it.
I had been following that over there too. Was curious how transactions here would go. Hoping that there wouldn't be any "questionable" dealings going on.Well I fell like the members who aren't on all the forums needed a heads up. Some people shouldn't have a second chance IMO.

rentedmule

11-28-07, 12:36 PM

http://www.syty.net/forums/showthread.php?t=51882&highlight=hotrodv6+thief

TreasonAgainstCaesar

11-28-07, 01:09 PM

has anyone received merchandise from this guy?

87wildside

12-15-07, 07:10 PM

http://www.syty.net/forums/showthread.php?t=51882&highlight=hotrodv6+thiefI was looking for that thread, thanks.

badazztoyz

02-06-08, 05:02 AM

email me what you got left for a 98 jimmy 4wd vortech sales@badazztoyz.com

87wildside

02-06-08, 10:39 AM

Sign up at S-Series Forum (http://s-seriesforum.com/forum/index.php?) and read the LS1 parking brake bracket and group purchase thread. http://s-seriesforum.com/forum/showthread.php?t=79778&page=1&pp=10

or this one

http://www.syty.net/forums/showthread.php?t=51882&highlight=hotrodv6+thief

droopy89

02-06-08, 04:14 PM

has anyone received merchandise from this guy?

yea, i got his headers a while back

turbodog

02-06-08, 05:22 PM

Folks, before doing business with this person, do yourself a favor and check out this thread:
http://www.syty.net/forums/showthread.php?t=46412&page=1&pp=20

Yes, it's 20 pages long, but you will get the gist of it long before reading that far.

Mikz86TA

02-06-08, 05:37 PM

Yeah, I remember something about this. Thx for the heads up. The link doesnt work on your other thread.

Dogsofjune

02-06-08, 06:09 PM

Really ever since 87wildside called him out he hasn't posted, tho it seems he still comes around.

Last Activity: 2 Weeks Ago 01:42 AM

I sent PM's to those that expressed interest.

And the Ebrake kits are just about finished, just have to get the axle brackets back from the powdercoater.
Posted on 9-19-07, to date nobody has received product or refunds. Bad deal.

Snafu'03

02-06-08, 07:16 PM

Wow... i jus read the entire 16pages over at SyTy and all i can say is wow... some people jus cant be trusted =/

Glad we were informed about this guy.. hate that he got over on a bunch of people but REALLY glad he didnt get any fellow Planet members :hug: ... least from what I read he didnt :rolleyes:

87wildside

02-06-08, 07:19 PM

This thread should just be locked IMO.

rentedmule

02-06-08, 07:37 PM

This thread should just be looked IMO.

do you mean locked? I was just thinking it may be a good idea to lock his account or ban him outright - as it is he can still PM unsuspecting members who haven't read the whole thread or trust him for some reason

Snafu'03

02-06-08, 07:46 PM

This thread should just be looked IMO.

ooooh he meant locked.... i gots confuzzled :tardbang:

:rofl:

87wildside

02-06-08, 07:49 PM

Fixed.

As for banning him that would be up to the admins. Since everything he has done wrong is on other forums they may not want to do it.

Snafu'03

02-06-08, 09:08 PM

Fixed.

thats right ! were the spelling police ! now up against the wall 'n spread 'em ! :alcoholic

... sry in a weird mood this evening....