Speakers, DEI upgrade alarms, distribution blocks, wires...etc.

[DMP]

Make a reasonable offer on anything you see. Just looking to make some room. If you need any specifics just ask. Paypal only. Thanks.

DEI Automate Alarm (older model...just includes the brain & 2 remotes...no harnesses...etc.)
DEI 30/40amp relays (Maybe 3 or 4 of these)

Pics on request for these. ^^^^




Relays
http://usera.imagecave.com/dmp23/01/DSCF1483.JPG


30amp fuse/holders
http://usera.imagecave.com/dmp23/01/DSCF1485.JPG

Wire bundles
http://usera.imagecave.com/dmp23/01/DSCF1486.JPG

Misc. cables (Monster, Stinger, Tsunami..etc. different sizes/lengths)
http://usera.imagecave.com/dmp23/01/DSCF1488.JPG


Tsunami distribution block
http://usera.imagecave.com/dmp23/01/DSCF1487.JPG

Monster cable distribution block
http://usera.imagecave.com/dmp23/01/DSCF1489.JPG

[DMP]

Rockford Fosgate distribution block
http://usera.imagecave.com/dmp23/01/DSCF1490.JPG

Raptor fuse
http://usera.imagecave.com/dmp23/01/DSCF1492.JPG

[87wildside]

How many relays you got? PM me with price for all please. Are any of the Dist. blocks (1) 2 or 4 ga. into (4) 8 or 10 ga.?

[Mikz86TA]

Nice Monster Block =) If anyone is looking at the Alarm DMP has and is wanting it, I have a few sirens for sale you can use with it. DEI is the best alarm manufacturer IMPO (in my professional opinion)

[boxcarracer963]

that little thing is all there is to an alarm?

[DMP]

Mikz, you might as well include those DEI led/valet switch combos too if you have it. They are gonna need that. Just noticed the switch is broken. :( But a seperate LED and valet switch will work too.

[DMP]

that little thing is all there is to an alarm?

Yup. Just missing the siren and its gonna need a led and valet switch. (Which I can get, but it will be seperate not like the DEI combo) The harness is there....just gotta extend the wires. It works if you have a factory remote. The shock sensor is built in. Im sure Mikz could tell you more. I dont know everything about DEI.

[boxcarracer963]

Yup. Just missing the siren and its gonna need a led and valet switch. (Which I can get, but it will be seperate not like the DEI combo) The harness is there....just gotta extend the wires. It works if you have a factory remote. The shock sensor is built in. Im sure Mikz could tell you more. I dont know everything about DEI.


about how hard is that to do yourself, do you know?

[Mikz86TA]

I have a DEI LED and Valet I can certainly throw in the price of my Siren. So if anyone wants to buy those from me, youre welcome to them. BTW, DMP, what model is that unit? bcr963, you could do it yourself if you have wiring experince. We can get you the colors/wiring per your year/model vehicle you intend to install it on. It would be best of you can solder tho. You need wiring strippers, solder iron, electrical tape(3M Super33 preferred in this job), razor cutter, digital multimeter, 7mm nut driver, 10mm driver and extention, be familiar or capable of removing dash panels, common sense about running wires, and .........uh DMP got anything else to add? hehehe

[DMP]

That all depends on your knowledge. First, you need the right tools. Then you need to be able to follow a wiring diagram and properly remove the underdash panels. I cant really tell you how easy it would be because I install alarms at my job. Its easy for me. If you really wanted to do it, either me or Mikz could guide you through it. Theres a good write-up on s10forum.com also. With the alarm im selling, programming it is kinda tricky. Id ask Mikz for help with that.

Edit- Just realized I posted right after you Mikz. The model is AM1

[boxcarracer963]

That all depends on your knowledge. First, you need the right tools. Then you need to be able to follow a wiring diagram and properly remove the underdash panels. I cant really tell you how easy it would be because I install alarms at my job. Its easy for me. If you really wanted to do it, either me or Mikz could guide you through it. Theres a good write-up on s10forum.com also. With the alarm im selling, programming it is kinda tricky. Id ask Mikz for help with that.

Edit- Just realized I posted right after you Mikz. The model is AM1


well i can run wires and stuff like that i did my system by myself, i know how to take the whole dash apart, pretty much all that stuff, but i have no idea what prices are for those? never really looked into alarms(dont know why)

[DMP]

Mikz, you know the retail price of the AM1? My guess is $50-$60, but I could be way off. But this was used, so id sell it cheaper than retail.

[boxcarracer963]

oh thats cheaper than expected

[plant.one]

Those 4x6's... whats their condition? and are they still available? Power Handling Capacity? etc

[boxcarracer963]

there 160 watts i think, same as mine

[DMP]

Those 4x6's... whats their condition? and are they still available? Power Handling Capacity? etc

Yes theyre still available. Condition is good...I wouldnt sell junk. Its a 2-way speaker. Peak power 120w, and rated power 20w.

[DMP]

Just added a DEI relay and an instruction manual and owners manual for the alarm. If you buy the alarm, id get the relay too.

[plant.one]

pm'ed about the speakers

[DMP]

A few things sold. But whats pictured is left. The speakers are reserved for plant one unless he backs out.

[Mikz86TA]

I actually couldnt find that particular model DMP. Is there a catalog ID? Like 791XV, 491T, etc?

[DMP]

I actually couldnt find that particular model DMP. Is there a catalog ID? Like 791XV, 491T, etc?

Its actually what I said above. AM1. Its not an old model either since ive installed a few of these last year. So I dont know. :shouldershrugg:

[plant.one]

A few things sold. But whats pictured is left. The speakers are reserved for plant one unless he backs out.

Paid in full, thanks man!

[DMP]

Speakers sold.

I also got a 40/50 relay if anybody wants it. Pic on request.

[plant.one]

Just Wanted to send a thanks for those speakers! I put them in on thursday and they really rounded out my sound now that those stock delco plates are outa my dash :)

thanks again!

[DMP]

Thats good to hear. No problem. :cool:

[DMP]

Bump. Still a few things left.

[DMP]

Bump. More added to the 1st page.

[DMP]

Some items listed on Ebay and new ones.
http://search.ebay.com/_W0QQsassZdmp-auctions

If you want something from me....PM me or post here. Ill give you a discount.