Dash Speaker Plates 4x6

[Mikz86TA]

OEM Dash Speaker Plates : This is a pair of OEM Dash Speaker Plates. They replace the 4x6 coaxial in upgraded Delco audio systems and add a tweeter. The tweeter is angled to disperse the highs off the glass.
They are from a 2nd Gen vehicls but can be used in 1st Gen if you are adding componets (mids in the door or kick panel).
Most 2nd Gen trucks (reg cab) have 4x6 speakers in the dash on the Front output and 6.5s in the door on the Rear outputs.
Most 2nd Gen trucks (ext cab) have the 6.5s in the door on the Front output and 4x6s in the rear pillars on the Rear outputs. In ext cabs the dash is left blank, unless it had the Premium Delco audio.
Most 2bd Gen SUVs have 6.5s in the front door on the Front outputs with these tweeters in the dash (only Premium Delco audio) and 5.25s in the rear door on the Rear output.
****These would be useful in a Truck Ext Cab to add the Premuim-Style audio or a custom set of componets without adding extra holes for a stealty look.
****These would be useful in a Truck Reg Cab to add a custom componet set without adding extra holes for a stealthy look.
****These would also be useful in a SUV to add Premium-Style or add componets without adding extra holes on models that do not already have these.
Also could be added to a 1st Gen truck if you were placing a componet set in with the mid in the door or kick-panels. This allows you to securely put the tweeters up higher and in a stealty location (OEM 4x6 dash opening).
I have 2 pairs. One has a pair of tweets (condition unknown and probably not working) and the other pair is bare.

$15.00 Shipped / Pair


http://i157.photobucket.com/albums/t43/Mikz86TA/General/S-pods1.jpg

[Mikz86TA]

If you need a better pic, just ask =)

[firefighter]

I modded a pair of those to hold my Polk DB tweets it worked out good. Just so you know their are options with these, oh and I paid more than that from the warehouse so it's a good price.

[Mikz86TA]

Thanks. Wanna buy another set? hehehe
Yeah, Its one of my favorite vehicles to do componets in. If the customer doesnt have them already. we usually get them and hide the tweet there. They love it.

[firefighter]

Well I got a spare pair just didn't want to mention it while you were selling yours. lol


You wanna buy a pair? lol

[Mikz86TA]

Oooh, we can swap them! Hehehehe

[JDangles]

Anyone still have a pair of these? I have a 2000 Sonoma standard with a 4cyl engine. If these will direct fit my truck, and work with a new component set I am purchasing, please pm me with price shipped. Also if you have any info on a component set that would fit these nicely, I'm interested in recommendations.

Thanks,
John

[JDangles]

Could anyone just tell me where I could get some of these?

[Mikz86TA]

PM Sent. Yes, I still have 2 pair

[firefighter]

I still got mine somewhere but let MIK sell 'em to ya I got too much going on right now, I can't even think long enough to take a crap. lol

[Mikz86TA]

SOLD 1 pr

I still got a single pair of them left =)

[jtarr_81]

I want em!!!

[Mikz86TA]

OK, PM me

[Mikz86TA]

SOLD!!!!

[Mikz86TA]

As stated I have sold out of the last pair I have. If you looked here and need a pair FIREFIGHTER (a fellow member) has a set to sell as well.
PM him for details.
THX

[firefighter]

Damn now I gotta take a crap. lol


see earlier post. heh heh.

[firefighter]

If somebody wants them lemme know I think I saw them on the other side of the C10 wedged in the "shop". read as an overstuffed 1 car garage.

[neo71665]

hell, I'll bite how much you asking?

[Black Knight]

Anyone still have a set of these plates?

[Mikz86TA]

I may be able to get a pair of them this upcoming week.
But FireFighter had a pair already. IDK if he sold them yet. PM him and ask, Im sure he wont mind. If his are gone, just PM me anytime and we can see what we can come up with.
THX, Michel