View Full Version : TOTM December
Joker2040
11-03-07, 10:29 PM
Okay guys here it is. TOTM for December... We have openings for 6 candidates. So post up pics of your ride & a mod list (And please don't post more then 2 or 3 pics and no mod list no entry) The polls will not be open till 15th of the month. So the 15th is the deadline for entries if we have 6 or not thats it will end. If there is more then 6 then you will be given a email telling you to reapply the next month. If you have won already give it 6 months from when you won before you post up again please. So everyone has a chance. So post up what you got. And thanks for all your help guys!!!
(PS just put up pics of your rides with mod list NO OTHER COMMENTS NEEDED THEY WILL BE DELETED ON THE SPOT)
Also if you could put your like this --- your link for your pic
stealthsuper
11-03-07, 11:35 PM
1994 S-10 SS Project ( Under Construction ) (black epoxy primer sealer for now) 383 stroker ( not intalled yet) , dual ram-air hood, shaved door handles, Shaved tails and tailgate w/ ZR1 conversion , flush fiberglass bed cover , clear corners , gen 2 bumper cover , Custom mirror tint ( tribal flame) , 18x10.5 rear - 18x8 front Z06 Corvette wheels ( black) , much more suspension work to come
http://i237.photobucket.com/albums/ff280/stealthsuper/croppedsides10.jpg
http://i237.photobucket.com/albums/ff280/stealthsuper/Picture025.jpg
http://i237.photobucket.com/albums/ff280/stealthsuper/119415864954121.jpg
SSXtreme350
11-04-07, 01:28 AM
2001 S10 Xtreme
4.3L V6
5-speed
Goodyear HR Directional Tires
Hypertech Programmer
K&N Gen II Intake
Custom Exhaust
2 Inch Belltech Drop Spindles
Wings West 3-pc Spoiler
Clear Corners
Clear Headlights
Slyvania Silverstars
Jack Rabbit Bed Topper
Custom Gauges by SpeedHut
Blue Interior Lights
Under Light Kit
SS Chrome Grille
Custom Floor Matts
Bedrug
GM Rollpan
Dual Ram-Air Hood
TYC Taillights
Tinted Windows
Pioneer Head Unit
Audiobahn Tweeters
Pioneer 6x9 Speakers
http://i59.photobucket.com/albums/g292/ssxtreme350/TOTMPic6.jpg
http://i59.photobucket.com/albums/g292/ssxtreme350/TOTMPic5.jpg
http://i59.photobucket.com/albums/g292/ssxtreme350/TOTMPic2.jpg
00S104.3
11-04-07, 04:20 AM
PERFORMANCE MODIFICATIONS -
K&N FIPK intake
Jet 180 degree thermostat
Hypertech Power Programmer III
Custom 2.25" Y-pipe
Flowmaster 40 series muffler
Accel 8mm spark plug wires
Royal Purple motor oil
Royal Purple max ATF
Royal Purple max-gear oil
Zexel torsen posi
EXTERIOR -
Xtreme wheels and 235/55/16 tires
Billet antenna
Bosch ICON wiper blades
Street scene SS power/heated side mirrors
Checkmate FX fiberglass bedcover
Clear front corner lenses
Nokya arctic white headlight bulbs
Upgraded headlight wire harness (so they don't melt)
Tinted tail lenses
Painted grille
Polished billet grille emblem
Removed "LS" cab emblems
Removed all tailgate emblems
Removed chrome fender trim and side moldings
132 decibel air horn kit
INTERIOR -
Tinted windows (windshield 50%, all other windows 5%)
Billet third door handle
Bowtie floor mats
Velour dash cover
Nu-image flame guages
Herculiner inside the bed
AUDIO -
Alpine CDA-9857 CD receiver
Alpine KCE-422i cord to connect ipod to receiver
6.5" Alpine Type R components in the doors
Accumat sound deadener in the doors and back of cab (so far)
Sirius satellite radio
Big 3 upgrade
SUSPENSION (front) -
Belltech 2" drop spindles
Belltech 2" drop coil springs
Belltech coil spring spacer
Belltech street performance shocks
Zq8 front sway bar
Energy suspension polyurethane front sway bar bushings and end links
SUSPENSION(rear) -
Belltech 3" lowered leaf springs
Stealth conversions driveshaft alignment kit with 4 degrees of shim
Heavy duty U-bolts from stealth conversions
Hellwig performance traction control springs
Zq8 rear sway bar
Belltech street performance shocks
http://i13.tinypic.com/52byrso.jpg
http://i17.tinypic.com/5y04guw.jpg
http://i9.tinypic.com/4cjsin8.jpg
More pics here...http://www.cardomain.com/ride/731283
LS1SLEEPER
11-05-07, 12:21 AM
2000 Blazer. not to many mods yet white face gauges (stock appering) not the gay light up kind. 5/6 drop 2" springs and 3" lower a arms 3" drop srpings rear and 3" blocks. 17X9.5 front 17x11 rear ZR1 wheels billet bowtie and clear parking light now installed no pics of that yet. and in the process of doing the sound system. 2 15" PG subs with 1 1500 watt mono block PG amp on each sub. 14 mids and highs through out with 2 4 channel 500 watt PG amps. next year its getting an LQ9 with a magnacharger and T56 trans.
http://s10v8.com/members/ZR1BLAZER/drop3.JPG
http://s10v8.com/members/ZR1BLAZER/drop.JPG
http://s10v8.com/members/ZR1BLAZER/DSCF0013.JPG
Gutling
11-06-07, 07:33 AM
2003 Chevrolet S-10
Exterior
Street Scene Mirrors
Street Scene Wiper Cowl (unpainted in pic)
Street Scene SS Front Bumper
Street Scene Smoked 3rd Brake Light Cover
Street Scene Tailgate Handle Relocator (not installed in pics)
Black/Clear Tailights
Black/Clear Projector Headlights
Black/Clear Turn Signals
Fiberglass 3-piece Roll Pan
Erubani Carbon Fiber Hood
Body Colored Front Grill
Suspension
Belltech 2" Spindles
Belltech 3" Blocks
Interior
Panasonic CD Player
Memphis M-Class Door Speakers
Memphis M-Class Dash Speakers
XM Sat Radio Tuner
Memphis 1-farad Digital Cap
Memphis 12" Subwoofer
Memphis 16-MCD250 Class D Single Channel Amplifier
VT single 12" box
Engine
Absolutely nothing, because I have a crate LS2 /w t56 at Current Performance Wiring waiting on me to get a DD for a few weeks
http://memimage.cardomain.net/member_images/7/web/2407000-2407999/2407436_6_full.jpg
http://memimage.cardomain.net/member_images/7/web/2407000-2407999/2407436_4_full.jpg
http://memimage.cardomain.net/member_images/7/web/2407000-2407999/2407436_5_full.jpg
LowSDime97
11-06-07, 03:03 PM
this is my first time entering so i will give it a shot...not many mods either but heres the list
1997 S10 4.3 Vortec 5spd
Interior:
Hurst Shifter
JVC KD-LH810 Head Unit
2 MTX 8500's in a custom ported box
Exterior:
SS Mirrors
Billet Antenna
Billet Grille
Clear Corners
Clear Headlights
Drilled and Slotted Rotors with Ceramic Pads
215/65/15 Kelly Charger Tires
Shaved Tailgate with licsene plate box recessed in the tailgate (under construction)
Smooth Steel Rollpan (not on yet)
Stock Window Tint
No Muffler Exhaust with the cat still on, lol
Suspension:
2" Spindles
Front Springs Cut
3" Rear Blocks
Shocks and Coils are stock, btw
Motor:
160 Hypertech Stat
Accel Ignition Coil
Accel Extreme 9000 Wires
CAI
Descreened MAF
Throttle Body Mod
Autolite Iridium Plugs
Xtreme24
11-08-07, 12:10 PM
i'll give it a shot
http://memimage.cardomain.net/member_images/4/web/508000-508999/508204_156_full.jpg
http://memimage.cardomain.net/member_images/4/web/508000-508999/508204_157_full.jpg
The Mods List
Exterior Mods
-Goodmark Gen.2 Cowl Hood
-Trenz Billet Grill
-Trenz Billet Antenna
-Trenz Billet Bowtie
-SS Mirrors
-Steel Angled LP Roll pan
-Shaved Tailgate
-Checkmate Fiberglass Bed Cover
-BEDRUG Fully Carpeted Bed
-Diamond Clear Headlights
-Diamond Clear Corners
-Tinted Tail Lights
Interior Mods
-Custom Painted Dash Bezel
-Custom Painted Door Bezels
-Custom Tweed Panels
-Custom Guage Panel
-KP Component Gauges
-White Face Gauges
-Klassix Inc. Bullit Billet Steering Wheel
-Kaik Billet Grab Bar
-EMS Billet Shifter Arm
-EMS Billet Gauge Overlay
-BilletPro Mirror
-BilletPro Headlight Knob
-AllPro HVAC Knobs
-Billet Optima Battery Tray
-2000 Envoy Door Handles
-2000 Camaro Needles
-2000 Cavalier Seats
-2000 Mustang Dome Light
Engine Mods
-Polished ECU
-Polished A/C Condenser
-Polished Master Cylinder
-Polished Coolant Tank
-York SC209 EDC
-K&N FIPK 2
-March Performance Pulleys
-Goodyear Gatorback Belt
-MSD 6A Ignition
-MSD 8.5mm Ignition Wires
-MSD Blaster Coil
-NGK TR6 Plugs
-Hypertech Reprogrammer (93 octane)
-Nitrous Express GM EFI Kit 75 Shot
-TB Mod
-EGR Mod
-MAF Mod
-Flowmaster 40 series muffler w/turndowns
-Mr.Gasket Cut Out
-McCord PP2 Power Plate
Suspension Mods
-18x8 Coy C-5's
-225/40/18 Kuhmo Ecsta AST
-Belltech 2" Spindles
-Slam Specialties RE7
-ART Roadgrater 3 Link
-Dual 5 Gallon Tanks
-Asco 3/8 Valves 1/2 Air line
-2 SMC Water/Oil Traps
-Chrome Differential Cover
I.C.E. (in car entertainment)
-Alpine 9856 CD/MP3/WPA
-Alpine TME-M710 Monitor
-JL Audio XR650CSI
-JL Audio 12W6V2
-JL Audio 500/1
-JL Audio 300/4
-Stinger 5 Farad Cap
-Stinger Wires
Lighting Mods
-8000K HID Kit
-Silverstar Fog's
-Silverstar Turn's
-LED Reverse Ligts
Link to more pictures
http://www.cardomain.com/ride/508204/1
LowSDime97
11-08-07, 05:44 PM
damnit Xtreme i envy u and ur truck! lol
SlowSonoma
11-09-07, 10:08 AM
ya extreme that **** is cool....love the rims.
I ordered 18" and 20" Junk yard dogs but am not putting them on till spring.
caliborn8
11-14-07, 06:16 PM
http://i158.photobucket.com/albums/t103/deviant951/truck3.jpg
http://i158.photobucket.com/albums/t103/deviant951/truck1.jpg
Under the hood-96..v6 vortec..k&n intake
Exterior- 6'' fabtech lift..black rock crawler rims...31'' pro comp mud terrain tires...custom front end- diamond euro headlights and clear corners..shaved tailgate..rollpan..smoked 3rd light and tailights....gibson exhaust...
Interior- custom fiberglass console with 12'' L7..rockford fosgate speakers(every speaker)..rockford amp..tweeters..7'' jensen touch screen dvd player..nu image platinum series gauges..grey tweed door panels, seats and cieling..
Under Construction- repaint the whole truck black with silver flakes..shave doors..body lift in the front with flared fenders..33'' tires...change all carpet and interior to black tweed..
TreasonAgainstCaesar
11-14-07, 06:26 PM
According to the rules, there are only 6 entries allowed per month. That limit is already well passed. Just so no one else tries to enter.
Joker2040
11-20-07, 12:19 PM
Poll has been added... As stated earlier only the first 6 are put into the poll. If you didn't make it this time then be sure to enter in the January poll.
Xtreme24
11-20-07, 03:26 PM
boo........TOTM Nazi! lol j/k, maybe next month.
LowSDime97
11-20-07, 11:10 PM
wow someone actually voted for me, lol
20Xtreme02
11-20-07, 11:40 PM
Wow, tough choice between the two Xtreme pickups. I'll have to think about it. I don't see the ability to vote for Xtreme24.
Hammer Head
11-22-07, 12:57 AM
When TOTM comes up next month post up your truck & a brief list of what it's got. ..pretty simple.
Midwestkreations
11-28-07, 11:30 PM
Love the truck xtreme24
the real deal
12-05-07, 05:55 PM
hey extreme what do u do when you come upon a speed bump? for that matter any obstical would cause that thing scrape. its a truck, not a honda with a bed.
boxcarracer963
12-05-07, 06:23 PM
im pretty sure he brings his truck up when he drives, its bagged
Cameo_S10
12-07-07, 12:35 AM
1989 S10 Cameo (Bought Brand New)
GTS Headlight blackouts
Ventshade Window Visors
Lowered 2 1/2" Front 4" Rear
Iroc 16" Aluminum Wheels (Nothing beats a Great set Of Factory Rims)
Unlimited Products 4" Cowl Induction (Open) Hood
High Flow Limited Restricted Cat Converter
Flowmaster 3" inlet dual 2" outlet - Duals Side Exited in stock location
Hypertech Computer Chip
Hypertech 50K Volt Coil Pak
Autolite 8.5 MM Ign. Wires
Undersized Drive Pulley
1" Throtle Body Spacer
K&N Filter W/ Moroso 10" Domed top on Factory Bottom
All Synthetic Fluids
Basically Stock
http://i206.photobucket.com/albums/bb79/cameo_s10/MVC-018S.jpg
http://i206.photobucket.com/albums/bb79/cameo_s10/MVC-016S.jpg
http://i206.photobucket.com/albums/bb79/cameo_s10/MVC-015S.jpg
IF YOU LIKE CLOSE TO STOCK & GREAT LOOKING THIS IS IT!
LowSDime97
12-07-07, 12:44 AM
did u use spacers for the irocs?
Laxmonster54
12-07-07, 12:45 AM
Dang man Nice truck But I think you have to enter in next months this one is almost over.
Sorry. but I love your truck it's pretty sexy
Cameo_S10
12-08-07, 03:27 AM
LowSDime97 (http://www.s10planet.com/forum/member.php?u=5673)
No I did not have to use spacers on the Irocs. The clearance is unbelieveable, just a little drag when turning all the way one way. You do have to be careful putting them on, they are marked front and rear and they will not go any other way. And only 1987 Irocs will work. I would love to have them chromed, but with 2 children and a wife well you know! Thanks for the comment!
Laxmonster54 (http://www.s10planet.com/forum/member.php?u=5770)
Thanks man, I kinda figured that out....After I did all the posting. Appreciate the compliments. I just entered next months TOTM Jan. Appreciate your vote? I am new here, but love it so far. Have a good one!
Mikz86TA
12-08-07, 02:48 PM
Nice Cameo.
The F-body wheels are a 16mm offset in the rear and 0mm in the front. Even on a F-body they will scrub just a little if you orig had the 15s. There is a different spindle-stop on the cars with OEM 16s.
The rears definately wont fit on the front, but an set of 4 fronts will work. Some F-body guys put a second set of fronts on the rear to make them stick out a bit.
There are 2 IROC makes. The 1st year 85 had 15" Irocs and they had the wider groove down the center of the spoke. After that they had the same design but in 16". Then they went with the style that had 2 smaller grooves down the spokes in 88-later.
In 91 and 92 they had the Flat 5-spoke design on the Z28 and RS which later became the S-series ZQ8 wheel.
Blazer69
12-08-07, 02:55 PM
i love your truck stealth super....should have gotten blacked out corners though......only gripe i have....sorry
haha i agree with the blacked corners but it is nice
stealthsuper
12-10-07, 12:22 AM
Just wait until its done :D
vBulletin® v3.7.3, Copyright ©2000-2008, Jelsoft Enterprises Ltd.